Note: Ingredients listed on restricted chemical lists
EC/CAS
111-41-1
Name of the chemical
2-(2-aminoethylamino)ethanol
Concentration
20-<50%
EC/CAS
13826-83-0
Name of the chemical
Ammonium tetrafluoroborate
Concentration
10-<20%
EC/CAS
111-42-2
Name of the chemical
N,N-Diethanolamine (Ethanol, 2,2'-iminobis-)
Concentration
5-<10%
EC/CAS
1314-13-2
Name of the chemical
Zinc oxide; C.I. 77947
Concentration
5-<10%
General Information
Revision date
2018-10-23
Product name
Stay Clean Aluminum Soldering Flux
1.2.1 Relevant identified uses
Metal Soldering
1.2.2. Uses advised against
Not known. Read this SDS before using this product
Emergency telephone
+1 (888) 609-1762, +1 (216) 383-8962, +1 (216) 383-8966, +1 (216) 383-8969
Icons in SDS
Company Information
company name
The Harris Products Group
e-mail address of the competent person responsible for the Safety Data Sheet
custservmason@jwharris.com
GHS Information
Signal word
Danger
Section 2
SECTION 2: Hazards identification
result in GHS classification: Classified according to the criteria of the Globally Harmonized System of Classification and Labeling of Chemicals (GHS), The United States Occupational Safety and Health Administration’s Hazard Communication Standard (29 CFR 1910.1200), Canada’s Hazardous Product Regulations and Mexico’s Harmonized System for the Identification and Communication of Hazards and Risks from Hazardous Chemicals in the Workplace.
Health hazards
Acute toxicity (Oral) Category 4 Skin Corrosion/Irritation Category 1B Serious Eye Damage/Eye Irritation Category 1 Skin sensitizer Category 1 Carcinogenicity Toxic to reproduction Category 2 Category 1B
Environmental hazards
Acute hazards to the aquatic Category 2 Chronic hazards to the aquatic Category 2
Signal word
Danger
Hazard statements
Harmful if swallowed. Causes severe skin burns and eye damage. May cause an allergic skin reaction. Suspected of causing cancer. May damage fertility or the unborn child. Toxic to aquatic life with long lasting effects.
Prevention
Wash thoroughly after handling. Do not eat, drink or smoke when using this product. Do not breathe dust/fume/gas/mist/vapors/spray. Wear protective gloves/protective clothing/eye protection/face protection. Contaminated work clothing should not be allowed out of the workplace. Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Use personal protective equipment as required. Avoid release to the environment.
Response
IF INHALED: Remove person to fresh air and keep comfortable for breathing. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower]. If skin irritation or rash occurs: Get medical advice/attention. IF SWALLOWED: Call a POISON CENTRE/doctor/… if you feel unwell. Rinse mouth. Do NOT induce vomiting. Immediately call a POISON CENTER/doctor. Specific treatment (see on this label). Wash contaminated clothing before reuse. Collect spillage.
Storage
Store locked up.
Disposal
Dispose of contents/container to an appropriate treatment and disposal facility in accordance with applicable laws and regulations, and product characteristics at time of disposal. Other hazards which do not Overexposure to fumes and gases from the solder and/or flux material can result in GHS classification be hazardous. Read and understand the manufacturer’s instructions, Safety Data Sheets and the precautionary labels before using this product. Substance(s) formed under the Fumes produced from use of this product may contain the following conditions of use constituent(s) and/or their complex metallic oxides as well as solid particles or other constituents from the solder, brazing consumable, flux material or base metal, or base metal coating not listed below. Chemical Identity Carbon dioxide Carbon monoxide Nitrogen dioxide CAS-No. 124-38-9 630-08-0 10102-44-0 Ozone 10028-15-6