ECO SMART Flux Green Powder

Hazard statements (CLP)

H361d, H372

Code

Statements

H361d

Suspected of damaging the unborn child

SECTION 2: Hazards identification

Classified according to the criteria of the Globally Harmonized System of Classification and Labeling of Chemicals (GHS). Emergency Overview Form Powder. Physical state Solid

Hazard statements

Open flames or hot surfaces from brazing or soldering operations can ignite combustible and flammable materials. Hazard Classification Toxic if swallowed, in contact with skin or if inhaled. Suspected of damaging the unborn child. Causes damage to organs Bone through prolonged or repeated exposure.

Health hazards

Acute toxicity (Oral) Category 3 Acute toxicity (Dermal) Category 3 Acute toxicity (Inhalation - dust and Category 3 mist) Reproductive toxicity Category 2 Specific Target Organ Toxicity - Category 1 Repeated Exposure

Signal word

Danger

Prevention

Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Do not breathe dust/fume/gas/mist/vapors/spray. Wash face, hands and any exposed skin thoroughly after handling. Do not eat, drink or smoke when using this product. Use only outdoors or in a well-ventilated area. Wear protective gloves/ protective clothing/ eye protection/ face protection.

Response

IF SWALLOWED: Immediately call a POISON CENTER/doctor. Rinse mouth. IF ON SKIN: Wash with plenty of soap and water. Take off immediately all contaminated clothing and wash it before reuse. Call a POISON CENTER or doctor/ physician if you feel unwell. Specific treatment (see supplemental first aid instructions on this label). IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER or doctor/ physician. IF exposed or concerned: Get medical advice/attention.

Storage

Store in a well-ventilated place. Keep container tightly closed. Store locked up.

Disposal

Dispose of contents/ container to an approved facility in accordance with local, regional, national and international regulations.

Other hazards which do not result in classification

None. Substance(s) formed under the Fumes produced from use of this product may contain the following conditions of use constituent(s) and/or their complex metallic oxides as well as solid particles or other constituents from the solder, brazing consumable, flux material or base metal, or base metal coating not listed below. Hydrogen fluoride, a possible decomposition product, is extremely corrosive and a poison by all routes of entry. Hydrogen fluoride can penetrate the skin and produce burns, which may not be immediately painful or visible; the burns impact the lower layers of skin and bone tissue. Hydrogen fluoride exposures involving 20 percent of the body or more can be fatal through systemic fluoride poisoning. Chemical Identity Carbon dioxide CAS-No. 124-38-9 Carbon monoxide Nitrogen dioxide Ozone 630-08-0 10102-44-0 10028-15-6

2.1 Classification of the substance or mixture

Health Hazards Acute toxicity (Oral) Category 3 Acute toxicity (Dermal) Category 3 Acute toxicity (Inhalation - dust and Category 3 mist) Reproductive toxicity Category 2 Specific Target Organ Toxicity - Category 1 Repeated Exposure