AL-BRAZE EC Powder

Hazard statements (CLP)

H302, H313, H315, H318, H362, H372, H411

Code

Statements

H302

Harmful if swallowed

SECTION 2: Hazards identification

result in GHS classification: Classified according to the criteria of the Globally Harmonized System of Classification and Labeling of Chemicals (GHS). Emergency Overview Form Powder. Physical state Solid

Hazard statements

Open flames or hot surfaces from brazing or soldering operations can ignite combustible and flammable materials. Hazard Classification Harmful if swallowed. May be harmful in contact with skin. Causes skin irritation. Causes serious eye damage. May cause harm to breast-fed children. Causes damage to organs Bone through prolonged or repeated exposure. Toxic to aquatic life with long lasting effects.

Health hazards

Acute toxicity (Oral) Category 4 Acute toxicity (Dermal) Category 5 Skin Corrosion/Irritation Category 2 Serious Eye Damage/Eye Irritation Category 1 Reproductive toxicity Effects on or via lactation Specific Target Organ Toxicity - Category 1 Repeated Exposure Environmental Hazards Acute hazards to the aquatic Category 2

Environmental hazards

Chronic hazards to the aquatic Category 2

Signal word

Danger

Prevention

Obtain special instructions before use. Do not breathe dust/fume/gas/mist/vapors/spray. Avoid contact during pregnancy and while nursing. Wash face, hands and any exposed skin thoroughly after handling. Do not eat, drink or smoke when using this product. Avoid release to the environment. Wear protective gloves/ eye protection/ face protection.

Response

IF SWALLOWED: Call a POISON CENTER/doctor if you feel unwell. Rinse mouth. IF ON SKIN: Wash with plenty of soap and water. If skin irritation occurs: Get medical advice/attention. Call a POISON CENTER or doctor/ physician if you feel unwell. Specific treatment (see supplemental first aid instructions on this label). Take off contaminated clothing and wash it before reuse. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER or doctor/ physician. IF exposed or concerned: Get medical advice/attention. Collect spillage.

Disposal

Dispose of contents/ container to an approved facility in accordance with local, regional, national and international regulations. Other hazards which do not None. result in GHS classification Substance(s) formed under the Fumes produced from use of this product may contain the following conditions of use constituent(s) and/or their complex metallic oxides as well as solid particles or other constituents from the solder, brazing consumable, flux material or base metal, or base metal coating not listed below. Hydrogen fluoride, a possible decomposition product, is extremely corrosive and a poison by all routes of entry. Hydrogen fluoride can penetrate the skin and produce burns, which may not be immediately painful or visible; the burns impact the lower layers of skin and bone tissue. Hydrogen fluoride exposures involving 20 percent of the body or more can be fatal through systemic fluoride poisoning. Chemical Identity Carbon dioxide Carbon monoxide Nitrogen dioxide Ozone CAS-No. 124-38-9 630-08-0 10102-44-0 10028-15-6

2.1 Classification of the substance or mixture

Health Hazards Acute toxicity (Oral) Category 4 Acute toxicity (Dermal) Category 5 Skin Corrosion/Irritation Category 2 Serious Eye Damage/Eye Irritation Category 1 Reproductive toxicity Effects on or via lactation Specific Target Organ Toxicity - Category 1 Repeated Exposure Environmental Hazards Acute hazards to the aquatic Category 2 environment Chronic hazards to the aquatic Category 2 environment