Note: Ingredients listed on restricted chemical lists
EC/CAS
236-675-5/13463-67-7
Name of the chemical
Reaction mass of titanium dioxide and silver chloride
Concentration
N/A
EC/CAS
215-108-5/1302-78-9
Name of the chemical
bentonite
Concentration
N/A
EC/CAS
231-667-8/7681-49-4
Name of the chemical
Sodium fluoride
Concentration
N/A
EC/CAS
231-157-5/7440-47-3
Name of the chemical
Chromium; chromic acid and its salts
Concentration
N/A
EC/CAS
215-691-6/1344-28-1
Name of the chemical
aluminium oxide
Concentration
N/A
EC/CAS
240-896-2/16871-90-2
Name of the chemical
Dipotassium hexafluorosilicate
Concentration
N/A
EC/CAS
231-105-1/14808-60-7
Name of the chemical
Silica, crystalline
Concentration
N/A
EC/CAS
231-105-1/7439-96-5
Name of the chemical
Manganese
Concentration
N/A
EC/CAS
231-176-9/7440-67-7
Name of the chemical
Zirconium and its compounds, with the exception of the substances listed under reference number 50 in Annex III, and the zirconium lakes, pigments or salts of the colouring agents when listed in Annex IV
Concentration
N/A
EC/CAS
231-159-6/7440-50-8
Name of the chemical
Copper
Concentration
N/A
EC/CAS
231-111-4/7440-02-0
Name of the chemical
Nickel
Concentration
N/A
EC/CAS
215-168-2
Name of the chemical
Iron Oxide Red
Concentration
N/A
EC/CAS
238-878-4
Name of the chemical
Quarz-A-Staub (s. u. TRGS 906)
Concentration
N/A
General Information
Revision date
2014-05-01
Product name
SHIELD-BRIGHT AND SHIELD-BRIGHT X-TRA FLUX
supplier name
THE ESAB GROUP, INC
Icons in SDS
Company Information
company name
THE ESAB GROUP, INC
Section 2
SECTION 2: Hazards identification
Emergency Overview: Metal wires in varying colors. These products are normally not considered hazardous as shipped. Gloves should be worn when handling to prevent cuts and abrasions. These products contain nickel, which is classified as toxic by prolonged inhalation, a skin sensitizer and a suspect carcinogen. Nickel powder is harmful for the environment. Some of these products contain cryolite. Cryolite is classified as toxic and dangerous for the environment. Some of these products contain potassium fluorosilicate which is classified as toxic by inhalation, skin contact, and ingestion. In the form that these substances are present in these products, they do not contribute to a hazard classification of the products. These products contain titanium dioxide which is possibly carcinogenic. These products contain quartz, but normally not in an inhalable fraction. Quartz can cause silicosis and may cause cancer. Avoid eye contact or inhalation of dust from these products. Skin contact is normally no hazard but should be avoided to prevent possible allergic reactions. Persons with a pacemaker should not go near welding or cutting operations until they have consulted their doctor and obtained information from the manufacturer of the device. When these products are used in a welding process, the most important hazards are heat, radiation, electric shock and welding fumes. Heat: Spatter and melting metal can cause burn injuries and start fires. Radiation: Arc rays can severely damage eyes or skin. Electricity: Electric shock can kill. Fumes: Overexposure to welding fumes may result in symptoms like metal fume fever, dizziness, nausea, dryness or irritation of the nose, throat or eyes. Chronic overexposure to welding fumes may affect pulmonary function. Prolonged inhalation of nickel and chromium compounds above safe exposure limits can cause cancer. Overexposure to manganese and manganese compounds above safe exposure limits can cause irreversible damage to the central nervous system, including the brain, symptoms of which may include slurred speech, lethargy, tremor, muscular weakness, psychological disturbances and spastic gait.