ALL-STATE COPPER BASED BRAZING ALLOYS

SECTION 2: Hazards identification

Emergency Overview: Metal rods and coated metal rods in varying colors. These products are normally not considered hazardous as shipped. Gloves should be worn when handling to prevent cuts and abrasions. Avoid eye contact or inhalation of dust from these products. Skin contact is normally no hazard but should be avoided to prevent possible allergic reactions. Persons with a pacemaker should not go near brazing operations until they have consulted their doctor and obtained information from the manufacturer of the device. When these products are used in a brazing process, the most important hazards are heat, radiation, electric shock and brazing fumes. Heat: Spatter and melting metal can cause burn injuries and start fires. Radiation: Arc rays can severely damage eyes or skin. Electricity: Electric shock can kill. Fumes: Overexposure to brazing fumes may result in symptoms like metal fume fever, dizziness, nausea, dryness or irritation of the nose, throat or eyes. Chronic overexposure to brazing fumes may affect pulmonary function. Overexposure to manganese and manganese compounds above safe exposure limits can cause irreversible damage to the central nervous system, including the brain, symptoms of which may include slurred speech, lethargy, tremor, muscular weakness, psychological disturbances and spastic gait. Flame When used with combustible gas equipment (e.g., oxy-acetylene torch), read the use and safety information for Processing: that equipment.