Note: Ingredients listed on restricted chemical lists
EC/CAS
9016-87-9
Name of the chemical
4,4'-Methylendiphenyldiisocyanat tech. (Polymeres) MDI, pMDI (in Form atembarer Aerosole, A-Fraktion)
Concentration
100.0%
EC/CAS
101-68-8
Name of the chemical
4,4’-Methylenediphenyl diisocyanate
Concentration
>40.0-<50.0%
General Information
Revision date
2014-10-20
Product name
Micon Component A Isocyanate
Icons in SDS
Company Information
company name
THE DOW CHEMICAL COMPANY
e-mail address of the competent person responsible for the Safety Data Sheet
SDSQuestion@dow.com
Section 2
SECTION 2: Hazards identification
OSHA Hazards Emergency Overview Color: Brown Physical State: Liquid. Odor: Musty Hazards of product: WARNING! May cause allergic skin reaction. May cause allergic respiratory reaction. May cause lung injury. Sprayed or heated material harmful if inhaled. May cause eye irritation. May cause skin irritation. May cause respiratory tract irritation. Elevated temperatures can cause hazardous polymerization. May react with water. Material reacts slowly with water, releasing carbon dioxide which can cause pressure buildup and rupture of closed containers. Elevated temperatures accelerate this reaction. Toxic fumes may be released in fire situations. Isolate area. Keep upwind of spill. Stay out of low areas. ® ™ TRADEMARK OF THE DOW CHEMICAL COMPANY ("DOW") OR AN AFFILIATED COMPANY OF DOW
Potential health effects
Eye Contact: May cause moderate eye irritation. May cause slight temporary corneal injury. Skin Contact: Prolonged contact may cause skin irritation with local redness. May stain skin. Skin Absorption: Prolonged skin contact is unlikely to result in absorption of harmful amounts. Skin Sensitization: Skin contact may cause an allergic skin reaction. Animal studies have shown that skin contact with isocyanates may play a role in respiratory sensitization. Inhalation: At room temperature, vapors are minimal due to low volatility. However, certain operations may generate vapor or mist concentrations sufficient to cause respiratory irritation and
Other hazards
Such operations include those in which the material is heated, sprayed or otherwise mechanically dispersed such as drumming, venting or pumping. Excessive exposure may cause irritation to upper respiratory tract (nose and throat) and lungs. May cause pulmonary edema (fluid in the lungs.) Effects may be delayed. Decreased lung function has been associated with overexposure to isocyanates. Respiratory Sensitization: May cause allergic respiratory response. MDI concentrations below the exposure guidelines may cause allergic respiratory reactions in individuals already sensitized. Asthma-like symptoms may include coughing, difficult breathing and a feeling of tightness in the chest. Occasionally, breathing difficulties may be life threatening. Ingestion: Low toxicity if swallowed. Small amounts swallowed incidentally as a result of normal handling operations are not likely to cause injury; however, swallowing larger amounts may cause injury. Observations in animals include: Gastrointestinal irritation.
Aspiration hazard
Based on physical properties, not likely to be an aspiration hazard Effects of Repeated Exposure: Tissue injury in the upper respiratory tract and lungs has been observed in laboratory animals after repeated excessive exposures to MDI/polymeric MDI aerosols.
Cancer information
Lung tumors have been observed in laboratory animals exposed to respirable aerosol droplets of MDI/Polymeric MDI (6 mg/m3) for their lifetime. Tumors occurred concurrently with respiratory irritation and lung injury. Current exposure guidelines are expected to protect against these effects reported for MDI. Birth Defects/Developmental Effects: In laboratory animals, MDI/polymeric MDI did not cause birth defects; other fetal effects occurred only at high doses which were toxic to the mother.