Note: Ingredients listed on restricted chemical lists
EC/CAS
5873-54-1
Name of the chemical
2,4’-Methylenediphenyl diisocyanate
Concentration
N/A
EC/CAS
811-97-2
Name of the chemical
1,1,1,2-Tetrafluoroethane
Concentration
N/A
EC/CAS
101-68-8
Name of the chemical
4,4’-Methylenediphenyl diisocyanate
Concentration
N/A
EC/CAS
9016-87-9
Name of the chemical
4,4'-Methylendiphenyldiisocyanat tech. (Polymeres) MDI, pMDI (in Form atembarer Aerosole, A-Fraktion)
Concentration
N/A
General Information
Revision date
2017-02-09
Product name
FROTH-PAK AF 650BF HFC Class A ISO Spray
1.2.1 Relevant identified uses
Component(s) for the manufacture of urethane polymers
Icons in SDS
Company Information
company name
THE DOW CHEMICAL COMPANY
e-mail address of the competent person responsible for the Safety Data Sheet
SDSQuestion@dow.com
GHS Information
Signal word
Warning!
Section 2
Hazardous Ingredients
Bisphenol-A, Ethylene Glycol
2.1 Classification of the substance or mixture
Skin Sensitization - Category 1 Skin Irritant - Category 2 Eye Irritant - Category 2A Toxic to Aquatic Life – Category 2 2.2a Signal word Warning
Hazard statements
May cause an allergic skin reaction Causes skin irritation Causes serious eye irritation Very toxic to aquatic life with long lasting effects ONE SECURITIES CENTRE, 3490 PIEDMONT ROAD, SUITE 1300, ATLANTA, GA 30305 SDS F3A TEL 404-634-9100 WWW.QUIKRETE.COM 2.2c Pictograms 2.2d Precautionary statements Do not handle until all safety precautions have been read and understood. Avoid contact with the skin and eyes Avoid breathing fumes Wear protective gloves, eye protection and clothing. If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If on skin (or hair): Remove immediately all contaminated clothing and wash before re-use. Rinse skin or hair with water. If significant skin irritation or rash occurs: get medical advice or attention. Immediately seek medical advice or attention if symptoms are significant or persist. Store in a well-ventilated place. Keep container tightly closed. Dispose of contents/containers in accordance with all regulations.
Additional information
Carcinogenicity This product contains titanium dioxide which IARC has classified as a Group 2B carcinogen (possibly carcinogenic to humans). Evidence is based on sufficient animal testing as a result of long- term inhalation at high concentrations of respirable amounts of titanium dioxide. Because this product is in liquid or paste form, it does not pose a dust hazard; therefore, this classification is not relevant. Note: sanding of this product will create a possible dust hazard. This product or one of its ingredients present at 0.1% or more IS listed as a carcinogen or suspect carcinogen by NTP, IARC, Prop 65 or OSHA. This product contains crystalline silica (quarts sand). IARC has classified crystalline silica as a Group 1 carcinogen. Both IARC and NTP consider silica as a known human carcinogen. Evidence is based on the chronic and long-term exposure workers have had to respirable sized crystalline silica dust particles. Because this product is in liquid or paste form, it does not pose a dust hazard; therefore, this classification is not relevant. Note: sanding of this product will create a possible silica dust hazard 2.3a HNOC – Hazards not otherwise classified: Not applicable ONE SECURITIES CENTRE, 3490 PIEDMONT ROAD, SUITE 1300, ATLANTA, GA 30305 SDS F3A TEL 404-634-9100 WWW.QUIKRETE.COM 2.3b Unknown Acute Toxicity: 7% of this mixture is of unknown acute toxicity. 2.3C WHMIS Classification Class D2B – Skin/Eye Irritant 2.3d Label Elements According To WHMIS
Signal word
Warning! SECTION III - HAZARDOUS INGREDIENTS/IDENTITY INFORMATION Hazardous Components CAS No. % by Weight Diglycidyl Ether of Bisphenol A 25085-99-8 30 - 60 Quartz Silica Sand (Crystalline Silica) 14808-60-7 20 – 40 Trimethylol Ethane Triglycidyl Ether 68460-21-9 7 - 15 Non – Hazardous Proprietary Ingredients Proprietary 3 – 7 Ethylene Glycol 107-21-1 1-5 Titanium Dioxide 13463-67-7 1-5 *The concentrations ranges are provided due to batch-to-batch variability.