General Information
Revision date
2004-07-21
Product name
CALIBRE* 701 Tint Polycarbonate Resin
Chemical name
Page
Icons in SDS
Company Information
company name
The Dow Chemical Company
Section 2
SECTION 2: Hazards identification
IDENTIFICATION EMERGENCY OVERVIEW KKEKEKRKEKEKKEKKKE KEE KEKE KKK KKK ERR EKER EKER ERE KER KKK REREKEKKEKEKKEEKEEKKKKKKKR KKK KKK KE * Solid. Color is variable. Odorless. Toxic fumes may be released * in fire situations. Slipping hazard. * KEKKKKKKEKKEKKEKRKEKKEEKKEE KEKE REE KEK KEKE KK KEK KEKE KKK KK KEKRKEKEKKKEEKKKKRKKKKKKKKK KEK
Potential health effects
(See Section 11 for toxicological data.) EYE: Solid or dust may cause irritation or corneal injury due to mechanical action. SKIN: Essentially non-irritating to the skin. Mechanical injury only. Under normal processing conditions, material is heated to elevated temperatures; contact with the material may cause thermal burns. No adverse effects anticipated by skin absorption. INGESTION: Very low toxicity if swallowed. Harmful effects not anticipated from swallowing small amounts. INHALATION: Dust may cause irritation to upper respiratory tract (nose and throat). SYSTEMIC (OTHER TARGET ORGAN) EFFECTS: Additives are encapsulated (Continued on page 2 , over) * OR (R) INDICATES A TRADEMARK OF THE DOW CHEMICAL COMPANY PAGE: 2 Product: CALIBRE* 701 Tint Polycarbonate Resin Product Code: 14658 Date: 06/16/04 Date: Printed: 07/21/04 MSD: 002576 in the product and are not expected to be released under normal processing conditions or foreseeable emergency.
Cancer information
No relevant information found. TERATOLOGY (BIRTH DEFECTS): No relevant information found. REPRODUCTIVE EFFECTS: No relevant information found. 4. FIRST AID EYE: Flush eyes with plenty of water; remove contact lenses after the first 1-2 minutes then continue flushing for several minutes. Only mechanical effects expected. SKIN: If molten material comes in contact with the skin, do not apply ice but cool under ice water or running stream of water. DO NOT attempt to remove the material from skin. Removal could result in severe tissue damage. INGESTION: No emergency medical treatment necessary. INHALATION: Move person to fresh air; if effects occur, consult a physician. NOTE TO PHYSICIAN: If burn is present, treat as any thermal burn, after decontamination. No specific antidote. Treatment of exposure should be directed at the control of symptoms and the clinical condition of the patient. 5. FIRE FIGHTING MEASURES FLAMMABLE PROPERTIES FLASH POINT: Not applicable METHOD USED: Not applicable AUTOIGNITION TEMPERATURE: Not applicable FLAMMABILITY LIMITS LFL: Not applicable UFL: Not applicable HAZARDOUS COMBUSTION PRODUCTS: During a fire, smoke may contain the original material in addition to combustion products of varying composition which may be toxic and/or irritating. Combustion products may include and are not limited to: phenolic compounds, carbon monoxide, carbon dioxide, hydrogen bromide. (Continued on page 3) * OR (R) INDICATES A TRADEMARK OF THE DOW CHEMICAL COMPANY DATA SHEET PAGE: 3 Product :CALIBRE* 701 Tint Polycarbonate Resin Product Code: 14658 Date: 06/16/04 Date: Printed: 07/21/04 MSD: 002576 OTHER FLAMMABILITY INFORMATION: Pneumatic conveying and other mechanical handling operations can generate combustible dust. To reduce the potential for dust explosions, do not permit dust to accumulate. Dense smoke is emitted when burned without sufficient oxygen. EXTINGUISHING MEDIA: Water, dry chemical fire extinguishers, carbon dioxide fire extinguishers. FIRE FIGHTING INSTRUCTIONS: Keep people away. Isolate fire area and deny unnecessary entry. Soak thoroughly with water to cool and prevent re-ignition. Cool surroundings with water to localize fire zone. Hand held dry chemical or carbon dioxide extinguishers may be used for small fires. PROTECTIVE EQUIPMENT FOR FIRE FIGHTERS: Wear positive-pressure, self-contained breathing apparatus (SCBA) and protective fire fighting clothing (includes fire fighting helmet, coat, pants, boots, and gloves). If protective equipment is not available or not used, fight fire from a protected location or safe distance. 6. ACCIDENTAL RELEASE MEASURES (See Section 15 for Regulatory Information) PROTECT PEOPLE: Spilled material may cause a slipping hazard. Use appropriate safety equipment. For additional information, refer to Section 8, Exposure Controls/Personal Protection. PROTECT
Environmental hazards
Prevent from entering into soil, ditches, sewers, waterways and/or groundwater. See Section 12, material is expected to remain in the soil. In the aquatic environment, material will sink and remain in the sediment. DEGRADATION & PERSISTENCE: This water insoluble polymeric solid is expected to be inert in the environment. Surface photodegradation is expected with exposure to sunlight. No appreciable biodegradation is expected. ECOTOXICITY: Not expected to be acutely toxic, but pellets may mechanically cause adverse effects if ingested by waterfowl or aquatic life. 13. DISPOSAL CONSIDERATIONS (See Section 15 for Regulatory Information)
ECOLOGICAL INFORMATION
CLEANUP: Sweep up. Collect with vacuum equipment. Collect in suitable and properly labeled containers. See Section 13, (For detailed Ecological data, write or call the address or non-emergency number shown in Section ENVIRONMENTAL FATE MOVEMENT & PARTITIONING: No bioconcentration is expected because of the relatively high molecular weight (MW >1000). In the terrestrial
Disposal
Considerations for additional information. 7. HANDLING AND STORAGE HANDLING: Good housekeeping and controlling of dusts are necessary for safe handling of product. Workers should be protected from the possibility of contact with molten resin. DO NOT DUMP INTO ANY SEWERS, ON THE GROUND, OR INTO ANY BODY OF WATER. All disposal methods must be in compliance with all Federal, State/Provincial and local laws and regulations. Regulations may vary in different locations. Waste characterizations and compliance with applicable laws are the responsibility solely of the waste generator. THE DOW CHEMICAL COMPANY HAS NO CONTROL OVER THE MANAGEMENT PRACTICES OR MANUFACTURING PROCESSES OF PARTIES HANDLING OR (Continued on page over) OR (R) INDICATES A TRADEMARK OF THE DOW CHEMICAL COMPANY DATA SHEET PAGE: Product :CALIBRE* 701 Tint Polycarbonate Resin Product Code: 14658 Date: 06/16/04 Date: Printed 07/21/04 MSD: 002576 USING THIS MATERIAL. THE INFORMATION PRESENTED HERE PERTAINS ONLY TO THE PRODUCT AS SHIPPED IN ITS INTENDED CONDITION AS DESCRIBED IN MSDS SECTION
Storage
Store in a dry place. 8. EXPOSURE CONTROLS/PERSONAL PROTECTION (Continued on page 4 , over) * OR (R) INDICATES A TRADEMARK OF THE DOW CHEMICAL COMPANY i—— —— — ——— = $$ $$ $< —_| DATA SHEET PAGE: 4 Product: CALIBRE* 701 Tint Polycarbonate Resin Product Code: 14658 Date: 06/16/04 Date: Printed: 07/21/04 MSD: 002576 ENGINEERING CONTROLS: Good general ventilation should be sufficient for most conditions. Local exhaust ventilation may be necessary for some operations. PERSONAL PROTECTIVE EQUIPMENT EYE/FACE PROTECTION: Use safety glasses. If there is a potential for exposure to particles which could cause eye discomfort, wear chemical goggles. SKIN PROTECTION: No precautions other than clean body-covering clothing should be needed. Use gloves with insulation for thermal protection, when needed. RESPIRATORY PROTECTION: In dusty or misty atmospheres, use an approved particulate respirator. EXPOSURE GUIDELINE(S): None established. 9. PHYSICAL AND CHEMICAL PROPERTIES APPEARANCE/PHYSICAL STATE: Solid. Color is variable. ODOR: Odorless VAPOR PRESSURE: Not applicable VAPOR DENSITY: Not applicable BOILING POINT: Not applicable SOLUBILITY IN WATER: Nil SPECIFIC GRAVITY: 1.20-1.24 10. STABILITY AND REACTIVITY CHEMICAL STABILITY: Stable. CONDITIONS TO AVOID: Avoid temperatures above 350C (662F). Exposure to elevated temperatures can cause product to decompose. INCOMPATIBILITY WITH OTHER MATERIALS: None known. HAZARDOUS DECOMPOSITION PRODUCTS: Decomposition products depend upon temperature, air supply and the presence of other materials. Processing may release fumes and other decomposition products. At temperatures exceeding melt temperatures, polymer fragments can be released. Fumes can be irritating. Decomposition products can include and are not (Continued on page 5) * OR (R) INDICATES A TRADEMARK OF THE DOW CHEMICAL COMPANY DATA SHEET PAGE: 5 Product :CALIBRE* 701 Tint Polycarbonate Resin Product Code: 14658 Date: 06/16/04 Date: Printed: 07/21/04 MSD: 002576 limited to: carbon monoxide, carbon dioxide, aromatic compounds, hydrocarbons, phenolics, polymer fragments, hydrogen bromide. HAZARDOUS POLYMERIZATION: Will not occur. 11.
TOXICOLOGICAL INFORMATION
(See Section for Potential Health Effects. For detailed toxicological data, write or call the address or non-emergency number shown in Section SKIN: The dermal LD50 has not been determined. INGESTION: Single dose oral LD50 has not been determined. MUTAGENICITY: No relevant information found. 12.