Note: Ingredients listed on restricted chemical lists
EC/CAS
9016-87-9
Name of the chemical
4,4'-Methylendiphenyldiisocyanat tech. (Polymeres) MDI, pMDI (in Form atembarer Aerosole, A-Fraktion)
Concentration
N/A
EC/CAS
14807-96-6
Name of the chemical
Talc
Concentration
N/A
EC/CAS
101-68-8
Name of the chemical
4,4’-Methylenediphenyl diisocyanate
Concentration
N/A
EC/CAS
1333-86-4
Name of the chemical
Carbon black
Concentration
N/A
General Information
Revision date
2005-09-13
Product name
BETASEAL(TM) 43533 Body Primer
Emergency telephone
989-636-4400
Icons in SDS
Company Information
company name
The Dow Chemical Company
GHS Information
Signal word
DANGER!
Section 2
SECTION 2: Hazards identification
OSHA Hazards Emergency Overview Color: Black Physical State: Liquid Odor: Solvent Hazards of product: DANGER! Extremely flammable liquid and vapor - Vapor may cause flash fire. May cause allergic skin and respiratory reaction. May be harmful if inhaled. May cause central nervous system effects; may cause respiratory tract irritation. Causes eye irritation. OSHA Hazard Communication Standard This product is a "Hazardous Chemical" as defined by the OSHA Hazard Communication Standard, 29 CFR 1910.1200.
Potential health effects
Eye Contact: May cause moderate eye irritation. May cause moderate corneal injury. Vapor may cause eye irritation experienced as mild discomfort and redness. Skin Contact: Brief contact may cause slight skin irritation with local redness. May cause drying and flaking of the skin. Skin Absorption: Prolonged skin contact is unlikely to result in absorption of harmful amounts. * Indicates a Trademark Skin Sensitization: Skin contact may cause an allergic skin reaction. Animal studies have shown that skin contact with isocyanates may play a role in respiratory sensitization. Has caused allergic skin reactions when tested in mice. Inhalation: Vapor concentrations are attainable which could be hazardous on single exposure. May cause respiratory irritation and central nervous system depression. Symptoms may include headache, dizziness and drowsiness, progressing to incoordination and unconsciousness. May cause nausea and vomiting. Decreased lung function has been associated with overexposure to isocyanates. May cause pulmonary edema (fluid in the lungs.) This material contains mineral and/or inorganic fillers. There is essentially no potential for inhalation exposure to these fillers incidental to industrial handling due to the physical state. Respiratory Sensitization: May cause allergic respiratory response. MDI concentrations below the exposure guidelines may cause allergic respiratory reactions in individuals already sensitized. Asthma-like symptoms may include coughing, difficult breathing and a feeling of tightness in the chest. Occasionally, breathing difficulties may be life threatening. Ingestion: Low toxicity if swallowed. Small amounts swallowed incidentally as a result of normal handling operations are not likely to cause injury; however, swallowing larger amounts may cause injury. Effects of Repeated Exposure: Contains component(s) which have been reported to cause effects on the following organs in animals: Blood. Kidney. Liver. Development of cataracts has been reported in laboratory animals after prolonged repeated skin exposure to acetone. Tissue injury in the upper respiratory tract and lungs has been observed in laboratory animals after repeated excessive exposures to MDI/polymeric MDI aerosols. Methyl ethyl ketone is probably not neurotoxic in itself but it potentiates the neurotoxicity of methyl-n-butyl ketone and n-hexane.
Cancer information
Lung tumors have been observed in laboratory animals exposed to aerosol droplets of MDI/Polymeric MDI (6 mg/m3) for their lifetime. Tumors occurred concurrently with respiratory irritation and lung injury. Current exposure guidelines are expected to protect against these effects reported for MDI. Birth Defects/Developmental Effects: Contains component(s) which did not cause birth defects in animals; other fetal effects occurred only at doses toxic to the mother. In laboratory animals, MDI/polymeric MDI did not cause birth defects; other fetal effects occurred only at high doses which were toxic to the mother.