SC-AwaTec pur II Component B

Th. Scholten GmbH & Co. KG

Revision date : 2018-01-03

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.
GHS07 GHS08
Health risk rating 5
Safety risk rating 1
Environmental risk rating 1

Note: Ingredients listed on restricted chemical lists

EC/CAS

9016-87-9

Name of the chemical

4,4'-Methylendiphenyldiisocyanat tech. (Polymeres) MDI, pMDI (in Form atembarer Aerosole, A-Fraktion)

Concentration

>50

General Information

Revision date

2018-01-03

Product name

SC-AwaTec pur II Component B

Product Synonyms

Diphenyl methane diisocyanate isomers and homologens

CAS No.

9016-87-9

1.2.2. Uses advised against

No relevant information available

Icons in SDS

GHS07 GHS08

Company Information

company name

Th. Scholten GmbH & Co. KG

e-mail address of the competent person responsible for the Safety Data Sheet

scholten@scholten-gmbh.de

GHS Information

Signal word

Danger

Hazard Codes

Hazard statements (CLP)

H315, H317, H319, H332, H334, H335, H351, H373

Hazard statements

Code

Statements

H315

Causes skin irritation

Section 2

2.1 Classification of the substance or mixture

According to Regulation (EC) No. 1272/2008 Skin irritation Category 2 (Skin Irrit. 2) Causes skin irritation H315 Sensitisation of the skin Category 1 (Skin Sens.1) May cause an allergic skin reaction H317 Eye irritation Category 2 (Eye Irrit. 2) Causes serious eye irritation H319 Acute toxicity (if inhaled) Category 4 (Acute Tox. 4) Harmful if inhaled H332 Sensitisation of the respiratory tract Category 1 (Sens. Resp. 1) May cause allergy or asthma symptoms H334 or breathing difficulties if inhaled. Specific target organ toxicity Category 3 (STOT SE 3) (single exposure) May cause respiratory irritation. H335 Carcinogenicity Category 2 (Carc. 2) Suspected of causing cancer H351 Specific target organ toxicity Category 2 (STOT RE 2) (repeated exposure) May cause damage to organs H373 through prolonged or repeated exposure. Label elements according to Regulation (EC) No. 1272/2008 The product is classified and labelled in accordance with CLP Regulation.

Signal word

Danger

Contains

Diphenyl methane diisocyanate, isomers and homologens [CAS: 9016-87-9]

Hazard statements

H315 Causes skin irritation. H317 May cause an allergic skin reaction. H319 Causes serious eye irritation. H332 Harmful if inhaled. H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled. H335 May cause respiratory irritation. H351 Suspected of causing cancer. H373 May cause damage to organs through prolonged or repeated exposure. EUH204 Contains isocyanates. May produce an allergic reaction.

Precautionary statements

P261 Avoid inhaling dust / fumes / gas / mist / vapours / spray. P280 Wear protective gloves / protective clothing / eye protection / face protection. P284 In case of inadequate ventilation: wear respiratory protection. P302+P352 If on skin: Wash with plenty of water and soap. P304+P340 If inhaled: Remove person to fresh air and keep comfortable for breathing. P305+P351+P338 If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing. P312 If feeling unwell: Call a poison centre / doctor.

Additional information

Contains isocyanates. Observe manufacturer’s instructions.

2.3 Other hazards

Persons with respiratory hypersensitivity (e.g. asthma, chronic bronchitis) should avoid contact with the product. Symptoms of excessive irritation of the respiratory tract by the product may persist for several hours. Dust, vapours and sprays are the main hazards to the respiratory tract.

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.