Tensorgrip P307 CA Compliant Low VOC Contact Adhesive

Hazard statements (CLP)

H222, H302, H302+H312+H332, H312, H319, H332, H336, H361f, H373, H412

Code

Statements

H222

Extremely flammable aerosol

SECTION 2: Hazards identification

Classification of the substance or mixture

Physical hazards

Flam. Aerosol 1 - H222

Health hazards

Acute Tox. 4 - H302 Acute Tox. 4 - H312 Acute Tox. 4 - H332 Eye Irrit. 2A - H319 Repr. 2 - H361f STOT SE 3 - H336 STOT RE 2 - H373

Environmental hazards

Aquatic Chronic 3 - H412 Human health The liquid may be irritating to eyes, respiratory system and skin. Symptoms following overexposure may include the following: Headache. Dizziness. Nausea, vomiting

Signal word

Danger

Hazard statements

H302+H312+H332 Harmful if swallowed, in contact with skin or if inhaled. H222 Extremely flammable aerosol. H319 Causes serious eye irritation. H361f Suspected of damaging fertility. H336 May cause drowsiness or dizziness. H373 May cause damage to organs through prolonged or repeated exposure. H412 Harmful to aquatic life with long lasting effects.

Precautionary statements

P210 Keep away from heat, sparks, open flames and hot surfaces. No smoking. P280 Wear protective gloves/ protective clothing/ eye protection/ face protection. P304+P340 If inhaled: Remove person to fresh air and keep comfortable for breathing. P305+P351+P338 If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P308+P313 If exposed or concerned: Get medical advice/ attention. P410+P412 Protect from sunlight. Do not expose to temperatures exceeding 50°C /122°F.

Contains

8.075 % of components with unknown hazards to the aquatic environment Methyl Acetate, n-Hexane

Other hazards

This product does not contain any substances classified as PBT or vPvB

2.1 Classification of the substance or mixture

Physical hazards Flam. Aerosol 1 - H222 Health hazards Acute Tox. 4 - H302 Acute Tox. 4 - H312 Acute Tox. 4 - H332 Eye Irrit. 2A - H319 Repr. 2 - H361f STOT SE 3 - H336 STOT RE 2 - H373 Environmental hazards Aquatic Chronic 3 - H412 Human health The liquid may be irritating to eyes, respiratory system and skin. Symptoms following overexposure may include the following: Headache. Dizziness. Nausea, vomiting. Label elements Pictogram Signal word Danger Hazard statements H302+H312+H332 Harmful if swallowed, in contact with skin or if inhaled. H222 Extremely flammable aerosol. H319 Causes serious eye irritation. H361f Suspected of damaging fertility. H336 May cause drowsiness or dizziness. H373 May cause damage to organs through prolonged or repeated exposure. H412 Harmful to aquatic life with long lasting effects. Precautionary statements P210 Keep away from heat, sparks, open flames and hot surfaces. No smoking. P280 Wear protective gloves/ protective clothing/ eye protection/ face protection. P304+P340 If inhaled: Remove person to fresh air and keep comfortable for breathing. P305+P351+P338 If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P308+P313 If exposed or concerned: Get medical advice/ attention. P410+P412 Protect from sunlight. Do not expose to temperatures exceeding 50°C /122°F. Supplemental label Contains 8.075 % of components with unknown hazards to the aquatic environment. information Contains Methyl Acetate, n-Hexane Other hazards This product does not contain any substances classified as PBT or vPvB. 3. Composition/information on ingredients Mixtures Methyl Acetate 30-60% CAS number: 79-20-9 Classification Flam. Liq. 2 - H225 Acute Tox. 4 - H302 Acute Tox. 4 - H312 Acute Tox. 4 - H332 Eye Irrit. 2A - H319 STOT SE 3 - H336 n-Hexane 5-10% CAS number: 110-54-3 M factor (Acute) = 1 Classification Flam. Liq. 2 - H225 Acute Tox. 4 - H302 Acute Tox. 4 - H312 Acute Tox. 4 - H332 Skin Irrit. 2 - H315 Eye Irrit. 2A - H319 Repr. 2 - H361f STOT SE 3 - H336 STOT RE 2 - H373 Aquatic Chronic 2 - H411 The full text for all hazard statements is displayed in Section 16. 4. First-aid measures Description of first aid measures General information Remove affected person from source of contamination. Place unconscious person on their side in the recovery position and ensure breathing can take place. Get medical attention if any discomfort continues. Inhalation Move affected person to fresh air and keep warm and at rest in a position comfortable for breathing. When breathing is difficult, properly trained personnel may assist affected person by administering oxygen. Get medical attention. Ingestion Get medical attention immediately. Never give anything by mouth to an unconscious person. Do not induce vomiting. Move affected person to fresh air and keep warm and at rest in a position comfortable for breathing. Skin Contact Remove affected person from source of contamination. Remove contaminated clothing. Wash skin thoroughly with soap and water. Get medical attention if any discomfort continues. Eye contact Remove any contact lenses and open eyelids wide apart. Only remove contact lenses if the person is conscious, coherent and they can remove them themselves If adhesive bonding occurs, do not force eyelids apart. Continue to rinse for at least 15 minutes. If in doubt, get medical attention promptly. Show this Safety Data Sheet to the medical personnel. Most important symptoms and effects, both acute and delayed General information High concentrations may cause central nervous system depression resulting in headaches, dizziness and nausea. The severity of the symptoms described will vary dependent on the concentration and the length of exposure. Inhalation Prolonged or repeated exposure may cause the following adverse effects: Irritation of nose, throat and airway. Coughing. Headache. Ingestion Prolonged or repeated exposure may cause the following adverse effects: Gastrointestinal symptoms, including upset stomach. Nausea, vomiting. Diarrhea. Skin contact Prolonged contact may cause redness, irritation and dry skin. Eye contact Prolonged or repeated exposure may cause the following adverse effects: Irritation and redness, followed by blurred vision. 5. Fire-fighting measures Extinguishing media Suitable extinguishing media Extinguish with alcohol-resistant foam, carbon dioxide or dry powder. Unsuitable extinguishing Do not use water jet as an extinguisher, as this will spread the fire. media Special hazards arising from the substance or mixture Specific hazards Pressurized container: Must not be exposed to temperatures above 50°C/120°F Containers can burst violently or explode when heated, due to excessive pressure build-up. Vapors are heavier than air and may spread near ground and travel a considerable distance to a source of ignition and flash back. Hazardous combustion Thermal decomposition or combustion products may include the following substances: products Aldehydes. Hydrocarbons Carbon monoxide (CO). Carbon dioxide (CO2). Advice for firefighters Special protective equipment Wear positive-pressure self-contained breathing apparatus (SCBA) and appropriate protective for firefighters clothing. 6. Accidental release measures Personal precautions, protective equipment and emergency procedures Personal precautions For personal protection, see Section 8. No smoking, sparks, flames or other sources of ignition near spillage. Environmental precautions Environmental precautions Avoid discharge into drains. Contain spillage with sand, earth or other suitable non- combustible material. Methods and material for containment and cleaning up Methods for cleaning up Stop leak if possible without risk. Eliminate all sources of ignition. No smoking, sparks, flames or other sources of ignition near spillage. Provide adequate ventilation. Avoid the spillage or runoff entering drains, sewers or watercourses. Absorb in vermiculite, dry sand or earth and place into containers. Wash thoroughly after dealing with a spillage. 7. Handling and storage