Note: Ingredients listed on restricted chemical lists
General Information
Version
6
Revision date
2023-05-18
Product name
Greenox , AdBlue , Automotive Urea Solution, AUS, Diesel Exhaust Fluid, DEF
CAS No.
57-13-6
REACH No
01-2119463277-33-xxxx
1.2.1 Relevant identified uses
NOx reducing agent, for injection into exhaust system of diesel engines. Industrial use for flue gas NOx reduction
1.2.2. Uses advised against
None
Emergency telephone
44(0)844 335 0001
Icons in SDS
Company Information
company name
Tennants Distribution Limited
e-mail address of the competent person responsible for the Safety Data Sheet
msds@tennantsdistribution.com
GHS Information
Signal word
None
Section 2
SECTION 2: Hazards identification
Directive 1999/45/EC: Classification of substance or mixture
Hazard pictograms
None
Signal word
None
Hazard statements
None
PBT Substances
Not applicable
vPvB Substances
Not applicable
2.1 Classification of the substance or mixture
According to Regulation (EC) No. 1272/2008 (CLP). This product is not classified according to the CLP regulation. Classification according to Directive 67/548/EEC or Directive 1999/45/EC Not classified Information concerning particular hazards for human health and environment: See section 16 for full text of any R phrases or H statements above see section 11 for more details on any health effects or symptoms. 2.2 Label elements Labelling according to Regulation (EC) 1272/2008: None Hazard pictograms: None Signal word: None Hazard statements: None 2.3 Other hazards Results of PBT and vPvB assessment PBT: Not applicable vPvB: Not applicable 3. COMPOSITION/INFORMATION ON INGREDIENTS Chemical characterisation: Mixture CAS No.: 57-13-6 Description: Urea Identification Numbers: EC Number: 200-315-5 Chemical characterisation: Mixtures Description: An aqueous solution of urea Dangerous components: There are no ingredients present which, within the current knowledge of the supplier and in the concentrations applicable, are classified as hazardous to health or the environment and hence require reporting in this section. Occupational exposure limits, if available, are listed in Section 8. 4. FIRST AID MEASURES 4.1 Description of first aid measures General advice: No special measures required. Inhalation Avoid inhalation of vapour mist or spray. If inhaled, supply fresh air. Get medical attention in case of complaints. Skin contact Immediately rinse with water. If skin irritation continues, get medical attention. Eye contact Check for and remove any contact lenses. Rinse opened eye for several minutes under running water. Get medical attention if irritation occurs. Ingestion Rinse out mouth and then drink plenty of water. Do not induce vomiting: call for medical help immediately. Protection of first-aiders No action shall be taken involving any personal risk or without suitable training. 4.2 Most import symptoms and effects, both acute and delayed Potential acute health effects: Eye contact: No known significant effects or critical hazards. Inhalation: Exposure to decomposition products may cause a health hazard. Serious effects may be delayed following exposure. Skin contact: No known significant effects or critical hazards. Ingestion: No known significant effects or critical hazards. 4.3 Indication of any immediate medical attention and special treatment needed Notes to physician: Treat symptomatically. Contact poison treatment specialist immediately if large quantities have been ingested or inhaled. In case of inhalation of decomposition products in a fire, symptoms may be delayed. The exposed person may need to be kept under medical surveillance for 48 hours. 5. FIRE FIGHTING MEASURES 5.1 Extinguishing Media Suitable extinguishing media: Use fire extinguishing methods suitable to surrounding conditions. Unsuitable extinguishing media: Not known 5.2 Special hazards arising from the substance or mixture Hazards from the substance or mixture: In a fire or if heated, a pressure increase will occur and the container may burst. Hazardous thermal decomposition products: Decomposition products may include the following materials carbon dioxide, carbon monoxide, nitrogen oxides and ammonia. Avoid breathing dusts, vapours or fumes from burning materials. In case of inhalation of decomposition products in a fire, symptoms may be delayed. 5.3 Advice for fire-fighters Special precautions for fire fighters: Promptly isolate the scene by removing all persons from the vicinity of the incident if there is a fire. No action shall be taken involving any personal risk or without suitable training. Special protective equipment for fire fighters: Fire-fighters should wear appropriate protective equipment and self- contained breathing apparatus (SCBA) with a full face-piece operated in positive pressure mode. Clothing for fire- fighters (including helmets, protective boots and gloves) conforming to European standard EN 469 will provide a basic level of protection for chemical incidents. 6. ACCIDENTAL RELEASE MEASURES 6.1 Personal precautions, protective equipment and emergency procedures For non-emergency personnel: No action shall be taken involving any personal risk or without suitable training. Evacuate surrounding areas. Keep unnecessary and unprotected personnel from entering. Do not touch or walk through spilled material. Put on appropriate personal protective equipment. For emergency responders: If specialised clothing is required to deal with the spillage, take note of any information in Section 8 on suitable and unsuitable materials. See also the information in "For non-emergency personnel". 6.2 Environmental precautions Do not allow to enter sewers/surface or ground water. 6.3 Methods and material for containment and cleaning up Absorb with liquid binding material (sand, diatomite, acid binders, universal binders, sawdust). Send for recovery or disposal in suitable receptacles. 6.4 Reference to other sections No dangerous substances are released. See section 7 for information on safe handling. See section 8 for information on personal protection equipment. See section 13 for disposal information. 7. HANDLING AND STORAGE 7.1 Precautions for safe handling Prevent formation of aerosols. Ensure good ventilation in the workplace. Technical measures/ Precautions: Store in a closed, dry room with good ventilation at temperature not below -11 ºC and not above +30 ºC. Instructions on the limit quantity of the substance/preparation to be stored under the conditions specified: no. Information about fire and explosion protection: No special measures required 7.2 Conditions for safe storage, including any incompatibilities Storage: Keep containers closed until required. Store away from oxidising agents. See section 10. Protect from frost, store in cool, dry conditions in well-sealed receptacles. 7.3 Specific end use(s) Store out of direct sunlight and below 30oC to keep product in best condition. For use in catalytic SCR systems the product must not be stored in, or come into contact at any point with: mild steel, aluminium, brass or copper as these will poison the catalyst. 8. EXPOSURE CONTROLS/PERSONAL PROTECTION Additional information about design of technical facilities: No further data, see section 7. 8.1 Control Parameters Ingredients with limit values that require monitoring at the workplace: The product does not contain any relevant quantities of materials with critical values that have to be monitored at the workplace. 8.2 Exposure controls Personal protective equipment: Select PPE appropriate for the operations taking place into account the product properties. General protective and hygiene measures Avoid close or long term contact with the skin. Do not eat, drink, smoke or sniff while working. Avoid contact with the skin. Do not inhale gases, fumes or aerosols. Wash hands before breaks and at the end of work. Eye/face protection Safety glasses. Hand protection Wear gloves impermeable to the product. Respiratory protection In case of inadequate ventilation wear respiratory protection. Recommended: Filter P2 (EN143) Body protection Protective work clothing. 9. PHYSICAL AND CHEMICAL PROPERTIES