Note: Ingredients listed on restricted chemical lists
EC/CAS
618-498-9/9016-87-9
Name of the chemical
4,4'-Methylendiphenyldiisocyanat tech. (Polymeres) MDI, pMDI (in Form atembarer Aerosole, A-Fraktion)
Concentration
50-<75%
General Information
Revision date
2024-11-13
Product name
TEKINJECT PU 2C FLEX B-comp
1.2.1 Relevant identified uses
Sealant for concrete. For professional users only
1.2.2. Uses advised against
All uses not specified in this section or in section 7.3
Emergency telephone
+32 3 707 21 60
Icons in SDS
Company Information
company name
Tekinject bv
e-mail address of the competent person responsible for the Safety Data Sheet
SDSdepartment@tekinject.com
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H315, H317, H319, H332, H334, H335, H351, H373
Hazard statements
Code
Statements
H315
Causes skin irritation
Section 2
SECTION 2: Hazards identification
Hazard statements
Acute Tox. 4: H332 - Harmful if inhaled. Carc. 2: H351 - Suspected of causing cancer. Eye Irrit. 2: H319 - Causes serious eye irritation. Resp. Sens. 1: H334 - May cause allergy or asthma symptoms or breathing difficulties if inhaled. Skin Irrit. 2: H315 - Causes skin irritation. Skin Sens. 1: H317 - May cause an allergic skin reaction. STOT RE 2: H373 - May cause damage to organs through prolonged or repeated exposure. STOT SE 3: H335 - May cause respiratory irritation.
Precautionary statements
P201: Obtain special instructions before use. P280: Wear protective gloves/face protection/protective clothing/respiratory protection/protective footwear. P302+P352 IF ON SKIN Wash with plenty of water P304+P340 IF INHALED Remove person to fresh air and keep comfortable for breathing P305+P351+P338 IF IN EYES Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P308+P313 IF exposed or concerned Get medical advice/attention P342+P311 If experiencing respiratory symptoms Call a POISON CENTER or doctor/physician P501: Dispose of contents/container in accordance with regulations on hazardous waste or packaging and packaging waste respectively. PU-22 SECTION 2: HAZARDS IDENTIFICATION (continued)
Supplemental label elements
EUH204: Contains isocyanates. May produce an allergic reaction.
Hazardous Ingredients
4,4´-methylenediphenyl diisocyanate, isomers and homologues
Additional information
As from 24 August 2023 adequate training is required before industrial or professional use.
2.3 Other hazards
Product does not meet PBT/vPvB criteria Endocrine-disrupting properties: The product does not meet the criteria.
