Note: Ingredients listed on restricted chemical lists
EC/CAS
618-498-9/9016-87-9
Name of the chemical
4,4'-Methylendiphenyldiisocyanat tech. (Polymeres) MDI, pMDI (in Form atembarer Aerosole, A-Fraktion)
Concentration
10-<25%
EC/CAS
202-966-0/101-68-8
Name of the chemical
4,4’-Methylenediphenyl diisocyanate
Concentration
10-<25%
General Information
Revision date
2024-10-21
Product name
TEKINJECT PU 1C FLEX
1.2.1 Relevant identified uses
Water sealing for concrete (Polyurethane). For professional users only
1.2.2. Uses advised against
All uses not specified in this section or in section 7.3
Emergency telephone
+32 3 707 21 60
Icons in SDS
Company Information
company name
Tekinject bv
e-mail address of the competent person responsible for the Safety Data Sheet
SDSdepartment@tekinject.com
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H315, H317, H319, H332, H334, H335, H351, H373
Hazard statements
Code
Statements
H315
Causes skin irritation
Section 2
SECTION 2: Hazards identification
Hazard statements
Acute Tox. 4: H332 - Harmful if inhaled. Carc. 2: H351 - Suspected of causing cancer. Eye Irrit. 2: H319 - Causes serious eye irritation. Resp. Sens. 1: H334 - May cause allergy or asthma symptoms or breathing difficulties if inhaled. Skin Irrit. 2: H315 - Causes skin irritation. Skin Sens. 1: H317 - May cause an allergic skin reaction. STOT RE 2: H373 - May cause damage to organs through prolonged or repeated exposure (Inhalation). STOT RE 2: H373 - May cause damage to organs through prolonged or repeated exposure. STOT SE 3: H335 - May cause respiratory irritation.
Precautionary statements
PU-02 SECTION 2: HAZARDS IDENTIFICATION (continued) P201: Obtain special instructions before use. P280: Wear protective gloves/face protection/protective clothing/respiratory protection/protective footwear. P302+P352 IF ON SKIN Wash with plenty of water P304+P340 IF INHALED Remove person to fresh air and keep comfortable for breathing P305+P351+P338 IF IN EYES Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P308+P313 IF exposed or concerned Get medical advice/attention P342+P311 If experiencing respiratory symptoms Call a POISON CENTER or doctor/physician P501: Dispose of contents/container in accordance with regulations on hazardous waste or packaging and packaging waste respectively.
Supplemental label elements
EUH204: Contains isocyanates. May produce an allergic reaction.
Hazardous Ingredients
4,4´-methylenediphenyl diisocyanate, isomers and homologues; Reaction mass of 4,4´- methylenediphenyl diisocyanate and o-(p - isocyanatobenzyl)phenyl isocyanate; 4,4´-methylenediphenyl diisocyanate
Additional information
As from 24 August 2023 adequate training is required before industrial or professional use.
2.3 Other hazards
Product does not meet PBT/vPvB criteria Endocrine-disrupting properties: The product does not meet the criteria.
