Note: Ingredients listed on restricted chemical lists
EC/CAS
1310-73-2
Name of the chemical
sodium hydroxide
Concentration
>99%
General Information
Product name
Sodium Carbonate
Product Synonyms
Caustic Soda; Aetznatron; Soda Lye; Sodium Hydrate
CAS No.
1310-73-2
1.2.1 Relevant identified uses
This product is recommended for laboratory and manufacturing use only. It is not recommended for drug, food or household use
Emergency telephone
(CHEMTREC
Icons in SDS
Company Information
company name
1000 Tedia Way
e-mail address of the competent person responsible for the Safety Data Sheet
tedia@tedia.com
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H290, H314, H402
Hazard statements
Code
Statements
H290
May be corrosive to metals
Section 2
2.1 Classification of the substance or mixture
Corrosive to Metals: GHS Category 1 Skin Corrosion: GHS Category 1A Serious Eye Damage: GHS Category 1 Acute Aquatic Toxicity: GHS Category 3
Signal word
DANGER!
Hazard statements
H290 – May be corrosive to metals. H314 – Causes severe skin burns and eye damage. H402 – Harmful to aquatic life.
Precautionary statements
P260 – Do not breath dust or mist. P264 – Wash skin thoroughly after handling. P273 – Avoid release to the environment. P280 – Wear protective gloves/protective clothing/eye protection/face protection. P301+P330+P331 – If SWALLOWED: Rinse mouth. Do NOT induce vomiting. P303+P361+P353 – If on skin or hair: Remove/take off immediately all contaminated clothing. Rinse skin with water/shower. P305+P351+P338+P310 – IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER/ doctor. P501 – Dispose of contents/ container to an approved waste disposal plant. Page 2 of 5 Emergency Overview Corrosive. Causes eye and skin burns. Hygroscopic. May cause severe respiratory tract irritation with possible burns. May cause severe digestive tract irritation with possible burns. Target Organs: Eyes, skin, and mucous membranes.
HMIS® ratings
Health – 3 Flammability – 0 Physical Hazard – 0 PPE – User supplied NOTE: HMIS ratings use a numbering scale that ranges from 0 - 4 to indicate the degree of hazard. A value of zero means the chemical presents no hazard while a value of four indicates a high hazard. These ratings are based on the inherent properties of this chemical under expected conditions of normal use and are not intended to be used in emergency situations. PPE is determined by the user based on their needs and conditions.
