Note: Ingredients listed on restricted chemical lists
EC/CAS
75-09-2
Name of the chemical
Methylene chloride
Concentration
N/A
General Information
Product name
Dichloromethane
Product Synonyms
Methylene Chloride, Methylene Dichloride, Methylene Bichloride, Methane Dichloride, DCM
CAS No.
75-09-2
1.2.1 Relevant identified uses
This product is recommended for laboratory and manufacturing use only. It is not recommended for drug, food or household use
Emergency telephone
(CHEMTREC
Icons in SDS
Company Information
company name
1000 Tedia Way
e-mail address of the competent person responsible for the Safety Data Sheet
tedia@tedia.com
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H302, H312, H320, H332, H336, H350
Hazard statements
Code
Statements
H302
Harmful if swallowed
Section 2
2.1 Classification of the substance or mixture
Acute Toxicity, Oral: GHS Category 4 Skin Irritation: GHS Category 2 Eye Irritation: GHS Category 2B Carcinogenicity: GHS Category 2
Signal word
DANGER!
Hazard statements
H302 – Harmful if swallowed. H312 – Harmful in contact with skin. H320 – Causes eye irritation. H332 – Harmful if inhaled. H336 – May cause drowsiness or dizziness. H350 – May cause cancer.
Precautionary statements
P243 – Take precautionary measures against static discharge. P280 – Wear protective gloves/protective clothing/eye protection/face protection. P301+P312 – IF SWALLOWED: Calla POISON CENTER or a doctor/physician. P303+P361+P353 – If on skin or hair: Remove/take off immediately all contaminated clothing. Rinse skin with water/shower. P304+P340 – IF INHALED: Call a POISON CENTER or doctor/physician if you feel unwell. Emergency Overview Harmful if swallowed, inhaled, or absorbed through the skin. Prolonged exposure may cause skin burns. Affects the central nervous system, liver, cardiovascular system, and blood. Causes irritation to the skin, eyes, and respiratory tract.
Aspiration hazard
Suspected cancer hazard. Possible static electrical hazard. Target Organs Blood and central nervous system.
HMIS® ratings
Health – 2* Flammability – 1 Physical Hazard – 0 PPE – User supplied NOTE: HMIS ratings use a numbering scale that ranges from 0 - 4 to indicate the degree of hazard. A value of zero means the chemical presents no hazard while a value of four indicates a high hazard. These ratings are based on the inherent properties of this chemical under expected conditions of normal use and are not intended to be used in emergency situations. PPE is determined by the user based on their needs and conditions.
