General Information
Product name
Chlorobenzene
Product Synonyms
Monochlorobenzene; Chlorobenzol; Phenyl chloride; Benzene chloride
CAS No.
108-90-7
1.2.1 Relevant identified uses
This product is recommended for laboratory and manufacturing use only. It is not recommended for drug, food or household use
Emergency telephone
(CHEMTREC
Icons in SDS
Company Information
company name
1000 Tedia Way
e-mail address of the competent person responsible for the Safety Data Sheet
tedia@tedia.com
GHS Information
Signal word
Warning
Hazard Codes
Hazard statements (CLP)
H226, H303, H315, H320, H333, H336, H411
Hazard statements
Code
Statements
H226
Flammable liquid and vapour
Section 2
2.1 Classification of the substance or mixture
Flammable Liquids: GHS Category 3 Acute Toxicity, Inhalation: GHS Category 4 Skin Irritation: GHS Category 2 Eye Irritation: GHS Category 2A Chronic Aquatic Toxicity: GHS Category 2
Hazard statements
H226 – Flammable liquid and vapor. H303 – May be harmful if swallowed. H315 – Causes skin irritation. H320 – Causes eye irritation. H333 – May be harmful if inhaled. H336 – May cause drowsiness and dizziness H411 –Toxic to aquatic life with long lasting effects.
Precautionary statements
P210 – Keep away from heat/sparks/open flames/hot surfaces. – No smoking. P243 – Take precautionary measure against static discharge. P280 – Wear protective gloves/protective clothing/eye protection/face protection. P303+P361+P353 – If on skin or hair: Remove/take off immediately all contaminated clothing. Rinse skin with water/shower. P501 – Dispose of contents/ container to an approved waste disposal plant. Emergency Overview Cause irritation to eyes, skin, and respiratory tract. Breathing vapors may cause drowsiness and dizziness. May be harmful if swallowed or inhaled. May cause liver damage. Flammable liquid and vapor. Possible static electrical hazard. Target Organs: Central nervous system, liver, respiratory system, eyes, and skin.
HMIS® ratings
Health – 2* Flammability – 3 Physical Hazard – 0 PPE – User supplied NOTE: HMIS ratings use a numbering scale that ranges from 0 - 4 to indicate the degree of hazard. A value of zero means the chemical presents no hazard while a value of four indicates a high hazard. These ratings are based on the inherent properties of this chemical under expected conditions of normal use and are not intended to be used in emergency situations. PPE is determined by the user based on their needs and conditions.
