Capping Solution (Acetic Anhydride and 2,6-Lutidine in Tetrahydrofuran, 1 1 8)

Hazard statements (CLP)

H225, H241, H302, H312, H314, H332

Code

Statements

H225

Highly Flammable liquid and vapour

2.1 Classification of the substance or mixture

Flammable Liquids: GHS Category 2 Acute Toxicity, Inhalation: GHS Category 3 Acute Toxicity, Dermal: GHS Category 4 Acute Toxicity, Oral: GHS Category 4 Skin Corrosion: GHS Category 1B Serious Eye Damage: GHS Category 1 Specific Target Organ Exposure, single exposure: GHS Category 3

Signal word

DANGER!

Hazard statements

H225 – Highly flammable liquid and vapor. H241 – Heating may cause a fire or explosion. H302 – Harmful if swallowed. H312 – Harmful in contact with skin. H314 – Causes severe skin burns and eye damage. H332 – Harmful if inhaled.

Precautionary statements

P210 – Keep away from heat/sparks/open flames/hot surfaces. – No smoking. P280 – Wear protective gloves/protective clothing/eye protection/face protection. P284 – Wear respiratory protection. P301+P310 – If SWALLOWED: Immediately call or POISON CENTER or a doctor/physician. P303+P361+P353 – IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower. P304+P340 – IF INHALED: Remove person to fresh air and keep comfortable for breathing. P305+P351+P338 – IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P332+P313 – If skin irritation occurs: Get medical advice/ attention. P403+P233 – Store in a well-ventilated place. Keep container tightly closed. P405 – Store locked up. P501 – Dispose of contents/ container to an approved waste disposal plant. Emergency Overview May be fatal if swallowed, inhaled, or absorbed through the skin. Causes buns and severe irritation to skin, eyes, and respiratory system. Readily absorbs through the skin. Affects cardiovascular system, central nervous system, liver, and kidneys. Highly flammable liquid and vapor. May form explosive peroxides. Hygroscopic.

HMIS® ratings

Health – 2* Flammability – 3 Physical Hazard – 1 PPE – User supplied NOTE: HMIS ratings use a numbering scale that ranges from 0 - 4 to indicate the degree of hazard. A value of zero means the chemical presents no hazard while a value of four indicates a high hazard. These ratings are based on the inherent properties of this chemical under expected conditions of normal use and are not intended to be used in emergency situations. PPE is determined by the user based on their needs and conditions.