Note: Ingredients listed on restricted chemical lists
EC/CAS
109-99-9
Name of the chemical
Tetrahydrofuran (618/2012)
Concentration
N/A
General Information
Product name
Capping Solution (1-Methylimidazole in Tetrahydrofuran, 1 9)
Product Synonyms
Capping Solution
1.2.1 Relevant identified uses
This product is recommended for laboratory and manufacturing use only. It is not recommended for drug, food or household use
Emergency telephone
(CHEMTREC
Icons in SDS
Company Information
company name
1000 Tedia Way
e-mail address of the competent person responsible for the Safety Data Sheet
tedia@tedia.com
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H225, H241, H302, H312, H314, H332
Hazard statements
Code
Statements
H225
Highly Flammable liquid and vapour
Section 2
2.1 Classification of the substance or mixture
Flammable Liquids: GHS Category 2 Acute Toxicity, Inhalation: GHS Category 3 Acute Toxicity, Dermal: GHS Category 5 Acute Toxicity, Oral: GHS Category 4 Skin Irritation: GHS Category 4 Eye Damage: GHS Category 1 Specific Target Organ Exposure, single exposure: GHS Category 3
Signal word
DANGER!
Hazard statements
H225 – Highly flammable liquid and vapor. H241 – Heating may cause a fire or explosion. H302 – Harmful if swallowed. H312 – Harmful in contact with skin. H314 – Causes severe skin burns and eye damage. H332 – Harmful if inhaled.
Precautionary statements
P210 – Keep away from heat/sparks/open flames/hot surfaces. – No smoking. P280 – Wear protective gloves/protective clothing/eye protection/face protection. P284 – Wear respiratory protection. P303+P361+P353 – If on skin or hair: Remove/take off immediately all contaminated clothing. Rinse skin with water/shower. Emergency Overview Causes irritation to eyes and respiratory tract. . May cause burns to eyes skin, mucous membranes, and respiratory tract. Highly flammable liquid and vapor. Vapor may cause flash fire. May form explosive peroxides. Hygroscopic.
HMIS® ratings
Health – 2* Flammability – 3 Physical Hazard – 1 PPE – User supplied NOTE: HMIS ratings use a numbering scale that ranges from 0 - 4 to indicate the degree of hazard. A value of zero means the chemical presents no hazard while a value of four indicates a high hazard. These ratings are based on the inherent properties of this chemical under expected conditions of normal use and are not intended to be used in emergency situations. PPE is determined by the user based on their needs and conditions.
