Note: Ingredients listed on restricted chemical lists
General Information
Product name
Cap A Solution (Isobutyric Anhydride in Acetonitrile, 20 80)
Product Synonyms
Capping Solution
1.2.1 Relevant identified uses
This product is recommended for laboratory and manufacturing use only. It is not recommended for drug, food or household use
Icons in SDS
Company Information
company name
1000 Tedia Way
e-mail address of the competent person responsible for the Safety Data Sheet
tedia@tedia.com
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H225, H302, H312, H314, H332
Hazard statements
Code
Statements
H225
Highly Flammable liquid and vapour
Section 2
2.1 Classification of the substance or mixture
Flammable Liquids: GHS Category 2 Skin Irritation: GHS Category 4 Eye Damage: GHS Category 1 Specific Target Organ Toxicity for single exposure: GHS Category 3
Signal word
DANGER!
Hazard statements
H225 – Highly flammable liquid and vapor. H302 – Harmful if swallowed. H312 – Harmful in contact with skin. H314 – Causes severe skin burns and eye damage. H332 – Harmful if inhaled.
Precautionary statements
P210 – Keep away from heat/sparks/open flames/hot surfaces. – No smoking. P280 – Wear protective gloves/clothing/eye protection/face protection. P284 – Wear respiratory protection. P301+P310 – If SWALLOWED: Immediately call or POISON CENTER or a doctor/physician. P303+P361+P353 – If on skin or hair: Remove/take off immediately all contaminated clothing. Rinse skin with water/shower. P304+P341 – If inhaled: If breathing is difficult, remove victim to fresh air and keep at rest in a position comfortable for breathing. Emergency Overview Harmful if swallowed, inhaled, or in contact with skin. Affects cardiovascular system, central nervous system, liver, and kidneys. May cause burns to skin, eyes, and respiratory tract. Highly flammable liquid and vapor.
HMIS® ratings
Health – 2* Flammability – 3 Physical Hazard – 1 PPE – User supplied NOTE: HMIS ratings use a numbering scale that ranges from 0 - 4 to indicate the degree of hazard. A value of zero means the chemical presents no hazard while a value of four indicates a high hazard. These ratings are based on the inherent properties of this chemical under expected conditions of normal use and are not intended to be used in emergency situations. PPE is determined by the user based on their needs and conditions.
