Note: Ingredients listed on restricted chemical lists
EC/CAS
1336-21-6
Name of the chemical
ammonium hydroxide
Concentration
N/A
EC/CAS
7732-18-5
Name of the chemical
Water, distilled, conductivity or of similar purity H2O
Concentration
N/A
General Information
Product name
Ammonium Hydroxide
1.2.1 Relevant identified uses
This product is recommended for laboratory and manufacturing use only. It is not recommended for drug, food or household use
Icons in SDS
Company Information
company name
1000 Tedia Way
e-mail address of the competent person responsible for the Safety Data Sheet
tedia@tedia.com
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H302, H315, H319, H331, H410
Hazard statements
Code
Statements
H302
Harmful if swallowed
Section 2
2.1 Classification of the substance or mixture
Acute Toxicity, Oral: GHS Category 4 Acute Toxicity, Inhalation: GHS Category 3 Skin Irritation: GHS Category 2 Eye Irritation: GHS Category 2
Signal word
DANGER!
Hazard statements
H302 – Harmful if swallowed. H315 – Causes skin irritation. H319 – Causes serious eye irritation H331 – Toxic if inhaled. H410 – Very toxic to aquatic life.
Precautionary statements
P273 – Avoid release to the environment. P280 – Wear protective gloves/protective clothing/eye protection/face protection. P284 – Wear respiratory protection. P301+P310 – If SWALLOWED: Immediately call or POISON CENTER or a doctor/physician. P303+P361+P353 – If on skin or hair: Remove/take off immediately all contaminated clothing. Rinse skin with water/shower. P304+P341 – If inhaled: If breathing is difficult, remove victim to fresh air and keep at rest in a position comfortable for breathing. Emergency Overview Corrosive. Causes burns by all exposure routes. Toxic if inhaled. Harmful if swallowed. May cause pulmonary edema. Very toxic to aquatic organisms..
HMIS® ratings
Health – 3 Flammability – 0 Physical Hazard – 1 PPE – User supplied NOTE: HMIS ratings use a numbering scale that ranges from 0 - 4 to indicate the degree of hazard. A value of zero means the chemical presents no hazard while a value of four indicates a high hazard. These ratings are based on the inherent properties of this chemical under expected conditions of normal use and are not intended to be used in emergency situations. PPE is determined by the user based on their needs and conditions.
