Note: Ingredients listed on restricted chemical lists
General Information
Product name
Acetic Acid Glacial
Product Synonyms
Acetic acid; Ethanoic acid; Methanecarboxylic acid; Vinegar acid
CAS No.
64-19-7
1.2.1 Relevant identified uses
This product is recommended for laboratory and manufacturing use only. It is not recommended for drug, food or household use
Icons in SDS
Company Information
company name
1000 Tedia Way
e-mail address of the competent person responsible for the Safety Data Sheet
tedia@tedia.com
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H226, H290, H314
Hazard statements
Code
Statements
H226
Flammable liquid and vapour
Section 2
2.1 Classification of the substance or mixture
Flammable Liquids: GHS Category 3 Skin Corrosion: GHS Category 1A Serious Eye Damage: GHS Category 1
Signal word
DANGER!
Hazard statements
H226 – Flammable liquid and vapor. H290 – May be corrosive to metals. H314 – Causes severe skin burns and eye damage.
Precautionary statements
P210 – Keep away from heat/sparks/open flames/hot surfaces. – No smoking. P280 – Wear protective gloves/protective clothing/eye protection/face protection. P284 – Wear respiratory protection. P301+P330+P331– IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. P303+P361+P353 – IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/ shower. P304+P340 – IF INHALED: Remove person to fresh air and keep comfortable for breathing. P305+P351+P338 – IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do - continue rinsing. P403+P235 – Store in a well-ventilated place. Keep cool. P501 – Dispose of contents/ container to an approved waste disposal plant. Page 2 of 6 Emergency Overview May be harmful if absorbed though the skin. Causes severe eye and skin burns. Cause severe digestive and respiratory burns. Flammable liquid and vapor. Acetic acid glacial solidifies below 62oF (17oC). Corrosive to metal. Target Organs: Teeth, eyes, skin, mucous membranes.
HMIS® ratings
Health – 2* Flammability – 2 Physical Hazard – 0 PPE – User supplied NOTE: HMIS ratings use a numbering scale that ranges from 0 - 4 to indicate the degree of hazard. A value of zero means the chemical presents no hazard while a value of four indicates a high hazard. These ratings are based on the inherent properties of this chemical under expected conditions of normal use and are not intended to be used in emergency situations. PPE is determined by the user based on their needs and conditions.
