Note: Ingredients listed on restricted chemical lists
General Information
Product name
1-Methylimidazole
Product Synonyms
N-Methylimidazole, 1H-Imidazole
CAS No.
616-47-7
1.2.1 Relevant identified uses
This product is recommended for laboratory and manufacturing use only. It is not recommended for drug, food or household use
Emergency telephone
(CHEMTREC
Icons in SDS
Company Information
company name
1000 Tedia Way
e-mail address of the competent person responsible for the Safety Data Sheet
tedia@tedia.com
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H227, H302, H311, H314, H318
Hazard statements
Code
Statements
H227
Combustible liquid
Section 2
2.1 Classification of the substance or mixture
Flammable Liquids: GHS Category 4 Acute Toxicity, Oral: GHS Category 4 Acute Toxicity, Dermal: GHS Category 3 Skin Corrosion: GHS Category 1B Serious Eye Damage: GHS Category 1
Signal word
DANGER!
Hazard statements
H227 – Combustible liquid and vapor. H302 – Harmful if swallowed. H311 – Toxic in contact with skin. H314 – Causes severe skin burns and eye damage. H318 – Causes serious eye damage.
Precautionary statements
P210 – Keep away from heat/sparks/open flames/hot surfaces. - No smoking. P264 – Wash skin thoroughly after handling. P280 – Wear protective gloves/protective clothing/eye protection/face protection. P301+P330+P331 – IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. P303+P361+P353 – IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower. P304+P341 – If inhaled: If breathing is difficult, remove victim to fresh air and keep at rest in a position comfortable for breathing. P501 – Dispose of contents/ container to an approved waste disposal plant. Emergency Overview Causes burns by all exposure routes. May be harmful if swallowed. Combustible liquid. Hygroscopic. Target Organs: Eyes, skin, and mucous membranes.
HMIS® ratings
Health – 3 Flammability – 2 Physical Hazard – 0 PPE – User supplied NOTE: HMIS ratings use a numbering scale that ranges from 0 - 4 to indicate the degree of hazard. A value of zero means the chemical presents no hazard while a value of four indicates a high hazard. These ratings are based on the inherent properties of this chemical under expected conditions of normal use and are not intended to be used in emergency situations. PPE is determined by the user based on their needs and conditions.
