Note: Ingredients listed on restricted chemical lists
EC/CAS
68919-39-1
Name of the chemical
Natural gas condensates; Low boiling point naphtha — unspecified (A complex combination of hydrocarbons separated and/or condensed from natural gas during transportation and collected at the wellhead and/or from the production, gathering, transmission, and distribution pipelines in deeps, scrubbers, etc. It consists predominantly of hydrocarbons having carbon numbers predominantly in the range of C2 through C8.)
Concentration
N/A
EC/CAS
110-54-3
Name of the chemical
n-Hexan (790/2009)
Concentration
N/A
EC/CAS
71-43-2
Name of the chemical
Benzol
Concentration
N/A
EC/CAS
108-88-3
Name of the chemical
Toluene
Concentration
N/A
General Information
Revision date
2020-11-17
Product name
Fort Hills Reduced Carbon Life Cycle Dilbit Blend, FRB, Fort Hills Dilbit, Blended Bitumen,
1.2.1 Relevant identified uses
A naturally-occurring bitumen blended with a light petroleum diluent to facilitate transportation and refining into a variety of petroleum products
supplier name
Thebacha Limited Partnership
Manufacturer Name
Thebacha Limited Partnership
Emergency telephone
Teck American Energy Sales Incorporated
Icons in SDS
Company Information
company name
Teck Resources Limited
GHS Information
Signal word
DANGER
Section 2
2.1 Classification of the substance or mixture
Health Physical Environmental Acute Toxicity (Oral, Inhalation) – Does not meet criteria Flammable Liquid – Category 1 Aquatic Toxicity – Skin Corrosion/Irritation – Category 2 Long Term - Eye Damage/Eye Irritation – Does not meet criteria Category 4 Respiratory or Skin Sensitization – Does not meet criteria Mutagenicity – Category 1B Carcinogenicity – Category 1A Reproductive Toxicity – Category 2 Specific Target Organ Toxicity Acute Exposure – Category 3 Chronic Exposure – Category 1 LABEL:
Signal word
DANGER
Precautionary statements
DANGER! NO SMOKING. Extremely flammable liquid and vapour. Obtain special instructions before use. Do not handle until all safety Inhalation of vapours may cause drowsiness or dizziness. precautions have been read & understood. Causes skin irritation. Keep away from heat, hot surfaces, sparks, open flames, and other ignition May cause genetic defects. sources. May cause cancer through inhalation or skin contact. Ground and bond all containers and receiving equipment. Suspected of damaging fertility or the unborn child. Use explosion-proof electrical/lighting/ventilation equipment and non-sparking Causes damage to organs through prolonged or repeated tools. exposure (CNS, Hematopoietic System) Keep containers tightly closed and avoid all potential for static discharges. May cause long lasting harmful effects to aquatic life. In case of fire, use foam, dry chemical or carbon dioxide (CO2) to extinguish. Use only outdoors or in a well-ventilated place. Wear protective gloves, protective clothing, face protection and eye wear. Do not breathe vapour or spray/mist. Wash exposed skin thoroughly after handling. Do not eat, drink or smoke when using this product. Store in a cool, well ventilated place. Keep containers tightly closed. Dispose of contents/containers according to local regulations. Avoid release to the environment. IF ON SKIN: Take off immediately all contaminated clothing. Rinse skin with plenty of soap and water or shower. IF INHALED: Remove person to fresh air and keep comfortable for breathing. IF EXPOSED or concerned or you feel unwell, get medical advice/ attention. Emergency Overview: A black liquid material with a petroleum or solvent odour. It is highly flammable even at room temperature and can easily generate an explosion hazard, particularly in confined or enclosed spaces. Vapours are heavier than air and will spread along the ground and collect in low or confined spaces (sewers, basements, tanks). They may travel considerable distances to sources of ignition and then flash back. Hydrogen sulphide gas (H2S) may be released from this material, particularly if heated. Exposure to very high concentrations of hydrogen sulphide (>500 ppm) will result in sudden unconsciousness and death without necessarily any warning odour being sensed. Firefighters responding to an accidental release should always wear a self-contained breathing apparatus and full protective clothing.
Potential health effects
Inhalation of high vapour concentrations may cause eye and respiratory irritation as well as central nervous system depression with dizziness, incoordination, headache, tiredness etc. Typically contains low levels of dissolved hydrogen sulphide which may accumulate in the head space above stored liquid. Exposure to high concentrations of H2S can result in unconsciousness and death. Contains small amounts of n-hexane which can produce peripheral neuropathy when inhaled in high concentrations. Contains small amounts of benzene which is associated with higher risks of leukemia. Contains trace amounts of polycyclic aromatic hydrocarbons, some of which are suspected carcinogens.
Environmental effects
This material is expected to be toxic to aquatic organisms and may cause long-term adverse effects in the aquatic environment. The bitumens contain trace amounts of polycyclic aromatic hydrocarbons (PAHs), some of which are considered to be moderately toxic, e.g., pyrene, benzo(a)pyrene, chrysene, phenanthrene. Most PAHs are relatively insoluble in water; they adhere to solid particles such as river and lake sediments. Microorganisms break down PAHs in soil or water after a period of weeks to months. These PAHs are bioaccumulative, in that their concentrations in plants and animals can be much higher than their concentrations in the soil or water they inhabit. Elevated PAH concentrations can be assumed to be significant toxicants to aquatic and terrestrial organisms. (See Ecological Information, Section 12).