Note: Ingredients listed on restricted chemical lists
EC/CAS
7439-92-1
Name of the chemical
Blei, massiv: [Partikeldurchmesser ≥ 1 mm]
Concentration
N/A
General Information
Revision date
2021-05-31
Product name
LC628, 63/37 Sn/Pb
1.2.1 Relevant identified uses
Production of tin-lead solder, manufacture of electronic devices. Not for use in contact with human food or animal feed materials This product has been classified in accordance with the hazard criteria of the Hazardous Products Regulation SOR/2015-17 and this SDS contains all the information required by both the HPR and the OSHA Hazard Communication Standard of 2012 (29 CFR 1910.1200(g) and Appendix D)
supplier name
Teck Metals Ltd
Manufacturer Name
Teck Metals Ltd
Emergency telephone
250-364-4214
Icons in SDS
Company Information
company name
Teck Metals Ltd
GHS Information
Signal word
DANGER
Section 2
2.1 Classification of the substance or mixture
Health Physical Environmental Acute Toxicity (Oral, Inhalation) – Does not meet criteria Does not meet criteria for Aquatic Toxicity – Skin Corrosion/Irritation – Does not meet criteria any Physical Hazard Short Term (Acute) - Eye Damage/Eye Irritation – Does not meet criteria Category 3 Respiratory or Skin Sensitization – Does not meet criteria Mutagenicity – Does not meet criteria Carcinogenicity – Category 2 Reproductive Toxicity – Category 1A Specific Target Organ Toxicity Acute Exposure – Does not meet criteria Chronic Exposure – Category 1 LABEL:
Signal word
DANGER
Precautionary statements
DANGER! Causes damage to kidneys, blood-forming systems, central Obtain special instructions before use. nervous system and digestive tract through prolonged or Do not handle until all safety precautions have been repeated exposure. read and understood. May damage the unborn child. May cause harm to breast-fed Do not breathe dust. children. Suspected of damaging fertility. Wear protective gloves, protective clothing, and eye Suspected of causing cancer. protection. Harmful to aquatic life. Wash hands thoroughly after handling. Do not eat, drink or smoke when using this product. Avoid release to the environment. If exposed or concerned or you feel unwell: Get medical advice/attention. Emergency Overview: A silvery-grey, heavy, soft metal that does not burn in bulk but will melt readily at temperatures above 245°C to form a molten metal pool. Finely-divided dust clouds are a moderate explosion hazard, however. This alloy contains 37% lead and fumes generated in a fire situation present the risk of lead inhalation and absorption. SCBA and full protective clothing required for fire emergency response personnel. contains valuable information critical to the safe handling and proper use of the product. Inhalation or ingestion of lead-containing dust or fumes from this product may result in headache, nausea, vomiting, abdominal spasms, fatigue, sleep disturbances, weight loss, anemia and leg, arm, and joint pain. Prolonged exposure may also cause central nervous system damage, gastrointestinal disturbances, anemia, kidney dysfunction and possible reproductive effects. Pregnant women should be protected from excessive exposure to dust or fume in order to prevent lead crossing the placental barrier and causing infant neurological disorders. Airborne lead dust or fume is considered a potential human carcinogen by IARC, ACGIH and NTP (see Toxicological Information, Section 11).
Environmental effects
The product, a tin-lead alloy, is unlikely to yield direct ecological effects, as the constituent metals (i.e., tin and lead), are generally not readily bioavailable. However, processing of the product or extended exposure in both aquatic and terrestrial environments may lead to the release of tin and lead compounds in more bioavailable, and therefore, potentially toxic, forms (see Ecological Information, Section 12).
