Note: Ingredients listed on restricted chemical lists
EC/CAS
74-85-1
Name of the chemical
Ethen; Ethylen
Concentration
15-25
EC/CAS
10043-11-5
Name of the chemical
boron nitride
Concentration
8-12 10-25
General Information
Revision date
2018-02-16
Product name
MO-RE Spray ‘n Fuse Mold Release Spray
Chemical name
Boron Nitride Release Agent/Dry Lubricant
1.2.1 Relevant identified uses
Release Agent/Dry Lubricant
Manufacturer Name
Techniglass Corporation
Icons in SDS
Company Information
company name
Techniglass Corporation
GHS Information
Signal word
Warning
Section 2
SECTION 2: Hazards identification
EMERGENCY OVERVIEW
Product definition
This product is intended as a mold release spray Pressurized container: Do not pierce or burn, even after use. Protect from sunlight. Do not expose to temperatures exceeding 122°F/50°C. Health Hazards: Do not eat, drink, or smoke when using this product. Wear protective gloves and wash thoroughly after handling. Wear protective gloves/clothing/eye protection/face. Use only in a well-ventilated area. IF INHALED: Move individual to fresh air. IF IN EYES: Rise cautiously with water for several minutes. Remove contact lenses if present and easy to do so. Continue rinsing. If eye irritation persists, seek medical attention. IF SWALLOWED: Call a POISON CENTER or doctor/physician if you feel unwell. Flammability Hazards: This product is Non-Flammable. Reactivity None known.
Environmental hazards
Could be toxic to aquatic life. Emergency Considerations Emergency responders must wear the proper personal protective equipment (and have appropriate fire- suppression equipment) suitable for the situation to which they are responding.
Hazard statements
Hazardous Materials Information System (NPCA-HMIS) Ratings: Health -2; Flammability -1; Reactivity -1; Personal Protection rating to be supplied by user depending on conditions. Contains gas under pressure; may explode if heated. Causes serious eye irritation. May cause drowsiness or dizziness.
Hazard pictograms
SIGNS AND SYMPTOMS OF EXCESSIVE EXPOSURE: Eye Contact: Physical irritation Inhalation: May cause respiratory irritation, drowsiness, or dizziness.
2.1 Classification of the substance or mixture
Gases under pressure – Liquefied Gas Serious Eye Damage/Irritation: Category 2A Specific Target Organ Toxicity (Single Exposure): Category 3
Signal word
Warning
Prevention
Avoid breathing dust/fume/gas/mist/vapors/spray. Wash thoroughly after handling. Use only outdoors or in a well-ventilated area. Wear protective gloves, protective clothing, eye protection, face protection. IF INHALED: Move individual to fresh air and keep at rest in a position comfortable for breathing. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Seek medical attention. Call a POISON CENTER or doctor/physician if you feel unwell. Pressurized container: Do not pierce or burn, even after use. Protect from sunlight: Do not expose to temperatures exceeding 122°F/50°C. Dispose of contents/container in accordance with local, regional, national, and international regulations.
2.3 Other hazards
Vapors are heavier than air and can cause suffocation by reducing oxygen available for breathing. Prolonged skin contact may cause dermatitis or frostbite. May cause cardiac arrhythmia.