Thermofit S1009 Adhesive, Parts A and B

Hazard statements (CLP)

H303, H315, H317, H320, H335, H413

Code

Statements

H303

May be harmful if swallowed

SECTION 2: Hazards identification

GHS Classification EMERGENCY OVERVIEW: This two-part epoxy resin consists of a viscous purple liquid (Part A) and a viscous tan liquid with a mercaptan odor (Part B). Avoid personal contact. Causes skin and eye irritation and burns.

2.3 Other hazards

Irritating, Sensitizing

2.1 Classification of the substance or mixture

Serious eye damage (Category 2A) Parts A & B Acute toxicity, Oral (Category 5) Part B Skin sensitization (Category 2B) Part B Acute aquatic toxicity (Category 3) Part B Minor component: N-Aminoethylpiperazine

Signal word

Danger Warning

Hazard statements

H303 May be harmful if swallowed H315 Causes skin irritation. H317 May cause an allergic skin reaction H320 Causes eye irritation. H335 May cause respiratory irritation. H413 May cause long lasting harmful effects to aquatic life.

Precautionary statements

P210 Keep away from heat/sparks/open flames/hot surfaces. No smoking. P264 Wash skin thoroughly after handling. P270 Do not eat, drink or smoke when using this product. P271 Use only outdoors or in a well-ventilated area. P273 Avoid release to the environment P280 Wear protective gloves/eye protection/face protection. P302 + P352 IF ON SKIN: Wash with plenty of soap and water. P304 + P340 IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P312 Call a POISON CENTER or doctor/physician if you feel unwell. P331 Do NOT induce vomiting. P332 + P313 If skin irritation occurs: Get medical advice/attention. P337 + P313 If eye irritation persists: Get medical advice/attention. P363 Wash contaminated clothing before reuse. P370 + P378 In case of fire: Use carbon dioxide, dry chemical, or foam to extinguish. P403 + P233 Store in a well-ventilated place. Keep container tightly closed. P501 Dispose of contents/container to an approved waste disposal facility. FLAMMABILITY/HMIS HAZARD CLASSIFICATIONS (US/CN/EU): Part A HEALTH: 2 FLAMMABILITY: 2 REACTIVITY: 0 Part B HEALTH: 3 FLAMMABILITY: 1 REACTIVITY: 1

Potential health effects

Health Effects/Symptoms of Exposure: Proper installation of this product creates no known acute or chronic health hazards.

Acute Health Hazards

EYES: Part A: This material is an eye irritant. Direct contact with the liquid or exposure to vapors or mists may cause stinging, tearing, redness, and swelling. Contact with molten material may cause thermal burns. Persons with pre-existing eye disorders may be more susceptible to the effects of this material. Part B: A component of this material is corrosive to the eyes. Direct contact with the liquid or exposure to vapors or mists may cause stinging, tearing, redness, swelling, and eye damage. Persons with pre- existing eye disorders may be more susceptible to the effects of this material. SKIN: Part A: This material is a skin irritant. Direct contact or exposure to vapors or mists may cause redness, burning, and skin damage. Repeated contact may cause an allergic skin reaction in sensitized individuals. Persons with pre-existing skin disorders may be more susceptible to the effects of this material. Contact with molten material may cause thermal burns. Part B: A component of this material is a severe skin irritant. Direct contact or exposure to vapors or mists may cause redness, burning, and skin damage. Repeated contact may cause an allergic skin reaction in sensitized individuals. Persons with pre-existing skin disorders may be more susceptible to the effects of this material. SKIN Part A: No harmful effects are expected from skin absorption of this material. ABSORPTION: Part B: A minor component of this material is toxic when absorbed through the skin. INGESTION: Part A: Ingestion of this material is highly unlikely. However, in the event such an exposure should occur, this product is expected to have a low degree of toxicity by ingestion. Part B: This material may be harmful or fatal if swallowed. Ingestion may result in severe irritation and burns of the mouth, throat, and digestive tract. Severe abdominal pain, nausea, vomiting, and collapse may also result from ingestion. INHALATION: Part A: Because of its low volatility, exposure to vapors is unlikely. In common with most organic materials, degradation and combustion byproducts may be toxic and should not be inhaled. See comments below and Section 5: FIRE FIGHTING MEASURES (Hazardous Combustion Products) for more specific information. Part B: Breathing vapors or mists may cause severe irritation and burns of the nose, throat, and respiratory tract. Symptoms of toxicity may include coughing, chest discomfort, and an allergic response in the lungs with asthma-like symptoms in sensitized individuals. Pre-existing lung disorders (e.g., asthma-like conditions) may be aggravated by exposure to this material.

Health hazards

Part A of this product has no known significant effects or critical hazards. A minor component of Part B (N- aminoethylpiperazine) has caused weak mutagenic activity in vitro test systems. The relevance of these findings to humans is uncertain. For further information, see Section 11: TOXICOLOGICAL INFORMATION (Mutagenicity).

Medical Conditions Generally Aggravated by Exposure

Overheating the material to temperatures above 149°C (300°F) may produce vapors that may cause eye, skin, nose, and throat irritation. Respiratory symptoms associated with pre-existing lung disorders (e.g., asthma-like conditions) may be aggravated by exposure to overheated material.

Additional information

None