General Information
Revision date
2014-10-06
Product name
3,5-Dimethylphenol
CAS No.
108-68-9
Emergency telephone
Chemical Emergencies
Icons in SDS
Company Information
company name
TCI AMERICA
e-mail address of the competent person responsible for the Safety Data Sheet
sales-US@TCIchemicals.com
GHS Information
Signal word
Danger!
Section 2
SECTION 2: Hazards identification
OSHA OSHA Haz Com: CFR 1910.1200: Acute Toxicity - Oral [Category 4] Acute Toxicity - Dermal [Category 3] Eye Damage/Irritation [Category 1] Aquatic Hazard (Acute) [Category 3] Skin Corrosion/Irritation [Category 1B]
Signal word
Danger!
Hazard statements
Causes serious eye damage Causes severe skin burns and eye damage Harmful if swallowed Toxic in contact with skin Harmful to aquatic life
Hazard pictograms
or Symbol(s)
Prevention
Do not eat, drink or smoke when using this product. Wash hands and face thoroughly after handling. Wear protective gloves and protective clothing. Do not breathe dusts or mists. Use only outdoors or in a well- ventilated area. Wear protective gloves, protective clothing, eye protection and face protection. Wear eye protection. Wear face protection (full length face shield).
Response
If swallowed Immediately call a poison center or doctor. Rinse mouth. If on skin Wash with plenty of water. Call a poison center or doctor if you feel unwell. Take off immediately all contaminated clothing and wash it before reuse. If swallowed Rinse mouth. Do NOT induce vomiting. If on skin (or hair) Take off immediately all contaminated clothing. Rinse skin with water or shower. Wash contaminated clothing before reuse. If inhaled: Remove person to fresh air and keep comfortable for breathing. Immediately call a poison center or doctor. If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Storage
Store locked up.
Disposal
Dispose of contents and container in accordance with US EPA guidelines for the classification and determination of hazardous waste listed in 40 CFR 261.3. (See Section 13)