Fiber Reinforced Molded Lumber (Black)

SECTION 2: Hazards identification

Signal word

None

Physical hazards

Not Classified

Health hazards

Not Classified

Hazard pictograms

None Handling and/or processing of this material may generate dust which Precautionary may cause mechanical irritation of the eyes, skin, nose and throat. High

Hazard statements

dust concentrations have a potential for combustion or explosion. When heated to decomposition it emits acrid smoke and irritating fumes.

Storage

Do not store near heat, open flames, strong oxidants or alkalis. Store flat and well supported across the entire span.

Disposal

Recycling is the preferred method.

Environmental hazards

None. However, it is recommended to be mindful of generated shavings, dust, and drop cut fragments during processing as they are not biodegradable and will remain in situ. Manufactured lumber ingredients are non-respirable, and may cause temporary skin and mucous membranes irritation due to mechanical abrasion effect of fibers. Under normal conditions of use, these products

2.3 Other hazards

may release dust and non-respirable fibers (Particles Not Otherwise Regulated). Under severe process conditions (e.g. shredding, crushing), these products may release very small amount of respirable particulate, some of which may be fiber-like in terms of l/d ratio. See Section 8 for Exposure Limit Data. The components of this product are embedded in an impervious polymer Supplemental Info: matrix and therefore present a negligible exposure risk under normal conditions of processing and handling. 630.264.1110 | 1001 Sullivan Rd., Aurora, IL 60506 | tangentmaterials.com