Note: Ingredients listed on restricted chemical lists
EC/CAS
8052-41-3
Name of the chemical
Stoddard Solvent; Naphtha (petroleum), hydrodesulfurized heavy
Concentration
N/A
EC/CAS
14808-60-7
Name of the chemical
Silica, crystalline
Concentration
N/A
General Information
Revision date
2015-04-02
Product name
TAM-PRO Q5 HEAVY BODY FLASHING CEMENT
Chemical name
Asphalt Mixture
1.2.1 Relevant identified uses
Roof Cements
Manufacturer Name
TAMKO Building Products, Inc
Icons in SDS
Company Information
company name
TAMKO Building Products, Inc
GHS Information
Signal word
Danger
Section 2
Signal word
Danger
2.1 Classification of the substance or mixture
Carcinogenicity – Category 1A Skin Irritation – Category 2 Eye Irritation – Category 2B Specific Target Organ Toxicity, Repeated Exposure – Category 1 Flammable Liquid – Category 3
Hazard statements
May cause cancer. Causes skin and eye irritation. Causes damage to organs through prolonged or repeated exposure. Flammable liquid and vapor.
Additional information
Can cause silicosis and other permanent lung damage
Prevention
Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Do not breathe dust/fume/mist/vapors/spray. Wear protective gloves/protective clothing/eye protection/face protection. Ground/bond container and receiving equipment. Take precautionary measures against static discharge. Use only non-sparking tools. Keep away heat/sparks/open flames/hot surfaces. - No smoking. Use explosion-proof equipment. Wash hands and exposed skin thoroughly after handling. Keep container tightly closed. Do not eat, drink or smoke when using this product.
Response
If on skin: Wash with plenty of water. Get medical advice/attention: If exposed or concerned or you feel unwell, if eye and or skin irritation persists. Specific treatment: See section 4-First Aid In case of fire: See Section 5. If on skin (or hair): Take off immediately all contaminated clothing, wash before reuse. Rinse skin with water/shower. If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Storage
Store locked up, in a well-ventilated place. Keep cool.
Disposal
Dispose in accordance with Federal, State, and Local regulations. (See section 13 for additional information).