Note: Ingredients listed on restricted chemical lists
EC/CAS
14808-60-7
Name of the chemical
Silica, crystalline
Concentration
N/A
EC/CAS
14464-46-1
Name of the chemical
Cristobalit (s. u. TRGS 906)
Concentration
N/A
EC/CAS
13463-67-7
Name of the chemical
Reaction mass of titanium dioxide and silver chloride
Concentration
N/A
EC/CAS
238-878-4
Name of the chemical
Quarz-A-Staub (s. u. TRGS 906)
Concentration
N/A
EC/CAS
238-455-4
Name of the chemical
Cristobalit (s. u. TRGS 906)
Concentration
N/A
EC/CAS
236-675-5
Name of the chemical
Titandioxid; [in Pulverform mit mindestens 1 % Partikel mit aerodynamischem Durchmesser ≤ 10 μm] (2020/217)
Concentration
N/A
General Information
Revision date
2019-02-22
Product name
TALOSTONE - QUARTZ SURFACES
1.2.1 Relevant identified uses
QUARTZ SURFACING PRODUCTS FOR INDOOR USE
supplier name
TALOS STONE PTY LTD
Emergency telephone
(0)405 451 858
Icons in SDS
Company Information
company name
TALOS STONE PTY LTD
e-mail address of the competent person responsible for the Safety Data Sheet
info@talostone.com.au
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H334, H335, H350, H372
Hazard statements
Code
Statements
H334
May cause allergy or asthma symptoms or breathing difficulties if inhaled
Section 2
2.1 Classification of the substance or mixture
NOT CLASSIFIED AS HAZARDOUS ACCORDING TO SAFE WORK AUSTRALIA CRITERIA
2.2 Label elements
No signal word, pictograms, hazard or precautionary statements have been allocated.
2.3 Other hazards
The product is not hazardous as supplied. However, hazards are associated with processing, including the fabrication workshop and upon installing and removing/demolishing slabs, as respirable crystalline silica quartz dust may be generated. Operations such as cutting, drilling, sawing, routing, grinding, chipping, polishing, sanding etc. can generate dust, and adequate ventilation and wet processes are recommended to keep exposure to airborne dust below acceptable limits. Overexposure to airborne quartz can cause silicosis (non-reversible scaring of the lung tissue) with a risk of cancer. DRY cutting, drilling, sawing, sanding etc are prohibited! DANGER! Category 1A (Carcinogenicity) (H334, H350, H372) Category 3 (Respiratory tract irritation) (H335)
Hazard statements
H334) May cause allergy or asthma symptoms or breathing difficulties if inhaled (H350) May cause CANCER (inhalation) (H372) Causes damage to lungs through prolonged or repeated exposure (inhalation) (H335) May cause respiratory tract irritation
Prevention
P201 Obtain special instructions before use. P202 Do not handle until all safety precautions have been read and understood. P260+P261 Do not breathe dust generated during the Fabrication Process, installation and removing/demolishing processes. P302 + P352 IF ON SKIN: Wash with plenty of soap and water. P264 Wash...thoroughly after handling. P270 Do not eat, drink or smoke when using this product. P280 Wear protective gloves/ protective clothing/ eye protection/ face protection. P281 Use personal protective equipment as required. P284 Wear respiratory protection.
