General Information
Revision date
2014-03-24
Product name
Assembled Roving, Direct Roving, Dry Chopped Strands, Wet
1.2.1 Relevant identified uses
For winding glass pipe, tank; suppress auto parts, bathtubs; for hand lay- up
supplier name
Taishan Fiberglass INC
Emergency telephone
+86-538-6622 028
Icons in SDS
Company Information
company name
Taishan Fiberglass INC
e-mail address of the competent person responsible for the Safety Data Sheet
ctgf@ctgf.com
GHS Information
Signal word
Not applicable
Section 2
Hazard pictograms
Not applicable.
Signal word
Not applicable.
Hazard statements
Not applicable.
Precautionary statements
Not applicable.
2.3 Other hazards
No information available. 3.1 Ingredients of Products: Product Name Glass,% Size, % Binder, % Water, % Assembled Roving 97. 70-99.85 0.1 5-2.10 I 0-0.20 Direct Roving 99.00-99.85 0.15 -0.80 I 0-0.20 Dry Chopped Strands 97.95-99.35 0.65 -1 .95 I 0-0.10 Wet Chopped Strands 86.85-94.00 0-1.15 I 6.00-12.00 Woven Roving 99.00-99.60 0.40- 0.80 I 0-0.20 Powder Chopped Strand Mat 92.20-97.40 0.30- 0.60 2.30-7.00 0-0.20 Emulsion Chopped Strand Mat 91 .20-96.70 0.30- 0.60 3.00-8.00 0-0.20 Glass fiber stitched fabrics 96.80-99.60 0.40 -3.00 I 0-0.20 Glass fiber wet-laid mat 89.50-96.00 4.00-10.00 I 0-0.50 Glass Filament Yarn 98.60- 99.20 0.70-1 .80 I 0-0.20 Fiber glass: 659997-17-3 Size: Not available. Size: Size is a mixture of chemicals applied to the glass strands. Most of this mixture is made up of basically non-reactive high molecular weight polymers, often natural ingredients(starches) with no reactive sites, which are not listed as substances in the EINECS nor in the ELINCS appendices. Sometimes size maybe also contain substances of organo-silane family or other substances. The manufacturer considers this risk as negligible as, even though listed as dangerous products, the concentration is extremely low(under 0.1 % of total weight) and they are polymerised during the production of glass fibers production. SECTION 4: First aid measures 4.1. Description of first aid measures Inhalation IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Get medical advice/attention if you feel unwell. Skin Contact If irritation occurs to the skin, rinse with soap and water. Make sure to refrain from rinsing with warm water since warm water will make the skin pores open to allow fiberglass to penetrate more deeply. If fiberglass penetrates the skin, use a wash cloth to help pull out the fiberglass. To avoid further irritation, do not rub or scratch affected skin. If irritation persists, get medical help. Make sure to refrain from using compressed air to remove fiberglass from the skin. Eye contact Immediately flush eyes with clean water for at least 15 minutes. If irritation persists, get medical help. Ingestion Normally, ingestion of this material is unlikely. If it does occur, watch the person for several days to make sure that gastrointestinal disturbance does not occur. Do not let the person vomit unless required by medical personnel. If disturbance persists, get medical help. 4.2. Most important symptoms and effects, both acute and delayed Ingestion: Ingestion of the material is unlikely. However, ingestion of the material may cause gastrointestinal disturbance. Inhalation: Breathing fiberglass dusts and particulates may cause irritation of the nose, throat and respiratory tract. Skin contact: Fiberglass dusts and particulates may cause temporary irritation. Eye contact: Fiberglass dusts and particulates may cause temporary irritation to the eyes. 4.3. Indication of any immediate medical attention and special treatment needed Treat symptomatically. 5.1. Extinguishing media. Suitable extinguishing media Non-flammable. But the packing material may burning. Use dry chemical, foam, carbon dioxide and water as extinguishing media. Unsuitable extinguishing media No information available 5.2. Special hazards arising from the substance or mixture Primary combustion products are carbon monoxide, hydrogen, carbon dioxide and water. Other undetermined compounds can be released in small quantities. 5.3. Advice for firefighters Firefighters should wear self-contained breathing apparatus and full firefighting turnout gear. 6.1. Personal precautions, protective equipment and emergency procedures Avoid dust generation. Avoid breath dust. 6.2. Environmental precautions Prevent entry into waterways, sewers, basements or confined areas. 6.3. Methods and material for containment and cleaning up Scooped up and put into a container for disposal. 6.4. Reference to other sections See Section 7 for more information See section 8 for more information See section 13 for more information 7 .1. Precautions for safe handling Try to prevent the packing material from be damaged and keep the product inside the packing material to minimize the generation of dusts. Maintain a clean work environment and avoid generation of fiberglass fragments from improper handling. 7.2. Conditions for safe storage, including any incompatibilities Keep product in its packaging until use to minimize potential dust generation. 7.3. Specific end use(s) Apart from the uses mentioned in SECTION 1.2 no other specific uses are stipulated. SECTION 8: Exposure controls/personal protection 8.1. Control parameters Permissible Exposure Limit Permissible Exposure Limit of Component: Fiber glass CAS#659997-17-3
2.1 Classification of the substance or mixture
Classification according to Regulation (EC) No. 1272/2008 (CLP] Not classified. Classification according to Directive 67/548/EEC or 1999/45/EC Not classified. 2.2. Label elements Symbols/Pictograms Not applicable. Signal word Not applicable. Hazard Statements Not applicable. Precautionary Statements Not applicable. 2.3. Other hazards No information available. 3.1 Ingredients of Products: Product Name Glass,% Size, % Binder, % Water, %