Note: Ingredients listed on restricted chemical lists
EC/CAS
7732-18-5
Name of the chemical
Water, distilled, conductivity or of similar purity H2O
Concentration
58%
General Information
Revision date
2024-04-29
Product name
WM10-02 - Part A Liquid
Product name
WM10-02 - Part A Liquid
Identification on the label/Trade name
Hazchem Code
Product Synonyms
None
CAS No.
7732-18-5
1.2.1 Relevant identified uses
Major recommended uses
Icons in SDS
Company Information
company name
T otal Waterproofing Supplies Corporate Pty Ltd
Section 2
Health hazards
INFORMATION
Potential health effects
Acute Swallowed : The product is considered to be slightly toxic by ingestion. Eye : May be an eye irritant. Skin : Prolonged or repeated contact with skin may result in slight skin irritation. Inhaled : Inhalation overexposure is not expected at normal use temperatures. Chronic : Principal routes of exposure are by accidental skin and eye contact and by inhalation of vapours especially at higher temperatures. As with any chemical product, contact with unprotected bare skin; inhalation of vapour, mist or dust in work place atmosphere; or ingestion in any form, should be avoided by observing good occupational work practice. First Aid Swallowed : Give plenty of water. Seek medical assistance. Decision on induction of vomiting to be made by qualified person. Eye : Immediately flush with large amounts of water for at 5-10 minutes; lifting upper and lower lids. Seek medical attention if irritation persists. Skin : Wash with water and soap. Seek medical attention if irritation persists. Inhaled : If affected, move subject to fresh air. Seek medical assistance if symptoms persist. First Aid Facilities : Ensure availability of eye wash fountains and/or water access. Advice to Doctor : Treat symptomatically. PRECAUTIONS FOR USE Exposure Standards Name: Polymer STL: TWA: 3 3 mg/m ppm mg/m ppm - - - - Water - - - - * Other Exposure information: Exposure standards not established for product, or other ingredients. Engineering Controls : General ventilation is recommended during normal use. Local ventilation may be required during certain operations to prevent inhalation of vapours. Personal Protection Respirator Type (AS/NZS 1716) : Where concentrations in air may exceed the recommended exposure limits, or work practice or other means of exposure reduction are not adequate, approved respirator may be necessary to prevent overexposure by inhalation. Ref : WM 10 - 02 - SDS date of issue April 2024 Page : 3 of 3 Glove Type : Neoprene/rubber gloves. Eye Protection : Safety glasses as appropriate. Clothing : Protective clothing to cover body parts, e.g. long sleeved overalls or similar; and boots. Other : Wash hands before smoking, eating, drinking or using the toilet and after finishing work. Observe the usual precautions when handling chemicals. Flammability Fire Hazards : Not flammable under conditions of use. Traces of flammable material may accumulate in the vapour space of closed drums, containers, vessels etc. SAFE HANDLING INFORMATION
Storage
Transport Location : Store in a cool area to prolong storage life. Temperature Conditions : Best stored at room temperature; Prevent from freezing. Protection from Weather : Store undercover and away from heat sources and electric plant. Incompatibilities : Not applicable.