Note: Ingredients listed on restricted chemical lists
EC/CAS
200-857-2/75-28-5
Name of the chemical
iso-Butan, enthält 0,1% Butadien
Concentration
>95 27-0026
EC/CAS
203-448-7/106-97-8
Name of the chemical
n-Butan, enthält 0,1% Butadien
Concentration
<3 32-0035
EC/CAS
203-450-8
Name of the chemical
1,3-Butadien
Concentration
N/A
General Information
Revision date
2012-07-25
Product name
Isobutane (>95%); SynthAir IB95 (>95%); SynthAir IB97 (>97%); SynthAir IB98 (>98%); SynthFreeze R600a 97 (>97%); SynthFreeze R600a 2.0 (>99%); SynthFreeze R600a 2.5 (>99,5%); SynthFreeze R600a 3.0 (>99,9); SynthCell IB95 (>95%); SynthCell IB97 (>97%); SynthCell IB98 (>98%); R600a (97%÷99,9%); SynthFreeze R600a (97%÷99,9%)
Product name
Isobutane (>95%); SynthAir IB95 (>95%); SynthAir IB97 (>97%); SynthAir IB98 (>98%); SynthFreeze R600a 97 (>97%); SynthFreeze R600a 2.0 (>99%); SynthFreeze R600a 2.5 (>99,5%); SynthFreeze R600a 3.0 (>99,9); SynthCell IB95 (>95%); SynthCell IB97 (>97%); SynthCell IB98 (>98%); R600a (97%÷99,9%); SynthFreeze R600a (97%÷99,9%)
Identification on the label/Trade name
Isobutane (>95%); SynthAir IB95 (>95%); SynthAir IB97 (>97%); SynthAir
Substance name
1.1.2
Product Synonyms
Iso-butane; i-Butane
CAS No.
75-28-5
REACH No
01-2119485395-27-0026
1.2.1 Relevant identified uses
Manufacture of substance (SU3, SU4, SU8, SU9, SU10, SU12, SU24, PROC1, PROC2, PROC3, PROC4, PROC7, PROC8a, PROC8b, PROC9, PROC12, PROC14, PROC15, ERC1, ERC2, ERC3, ERC4, ERC5, ERC7, ERC8a, ERC9a, ERC10a, ERC11a)
1.2.2. Uses advised against
This product is advised against any industrial, professional or consumer use differing from the above-listed Identified Uses
Emergency telephone
+39 0384-56022 (office hours
Icons in SDS
Company Information
company name
SYNTHESIS CHIMICA SRL
e-mail address of the competent person responsible for the Safety Data Sheet
info@synthesischimica.com
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H220, H280
Hazard statements
Code
Statements
H220
Extremely flammable gas
Section 2
SECTION 2: Hazards identification
2.1 Classification of the substance or mixture
2.1.1 Classification Category 1 Flammable gases Gas under pressure* Category 1
Hazard pictograms
GHS02 GHS04 Warning Warning H220: Extremely flammable gas GHS02 GHS04* Warning H220: Extremely flammable gas
Hazard statements
H280: Contains gas under pressure; may explode if heated The substance contains less than 0,1% w/w 1,3-butadiene. H280: Contains gas under pressure; may explode if heated P102:Keep out of reach of children
2.2 Label elements
2.2.1 Labelling
Prevention
P210:Keep away from heat/sparks/open flames/hot surfaces. — No smoking P243:Take precautionary measures against static discharge P320:Specific treatment is urgent (see … on this label)
Response
P377 Leaking gas fire Do not extinguish, unless leak can be stopped safely P381:Eliminate all ignition sources if safe to do so
Storage
P410+P403:Protect from sunlight. Store in a well-ventilated place
Precautionary statements
Disposal P501:Dispose of contents/container to in accordance with local/regional/national/ international regulation NOTES: * Labelling is simplified by virtue of the derogation Annex 1 Section 1.3.2.1 of Regulation
Contains
ISOBUTANE
2.3 Other hazards
HEALTH RISKS: The vapors at high concentrations can cause narcotic effects. It is a simple asphyxiant gas, dangerous as it removes the oxygen from the atmosphere. Contact with the liquid causes freezing. PHYSICAL AND CHEMICAL HAZARDS/FIRE AND EXPLOSION HAZARD:It is a highly flammable gas, is under pressure may explode if heated. Liquefied gases under pressure, highly flammable, with danger of explosion with air if released in enclosed or delimited. In case of release, the leaking liquid from the container quickly evaporates, absorbing heat, it mixes with the air to form an explosive mixture and creates the danger of fire and / or explosion with air. The gas is heavier than air, spreads close to the ground and can collect in confined areas (sewers, drains, basements, ...), it is invisible, but it produces a mist in the presence of moist air. The strong heating of the container (for example in case of fire) causes a substantial increase in the volume and pressure of the liquid, with risk of bursting of the receptacle that contains it. In this case the material can decompose producing CO2 (carbon dioxide) and CO (carbon monoxide is a highly toxic). 2.3.1 Other
Results of PBT and vPvB assessment
In accordance with the criteria set forth in the Annex XIII of the REACH Regulation, the substance is not defined as persistent, bioaccumulative and harmful to the environment.