Note: Ingredients listed on restricted chemical lists
EC/CAS
123-86-4
Name of the chemical
acetic acid, butyl ester
Concentration
N/A
EC/CAS
9004-36-8
Name of the chemical
cellulose acetate butyrate
Concentration
N/A
General Information
Revision date
2014-08-20
Product name
AIR BRUSH FLUID KIT
1.2.1 Relevant identified uses
Air Brush spray painting use PRODUCT IS READY TO USE
Emergency telephone
(02) 9772 9000 Business Hours 7am-5pm Monday to Friday
Icons in SDS
Company Information
company name
Sydney Automotive Paints and Equipment P/L
Section 2
Health hazards
IDENTIFICATION APPROVED CRITERIA
2.1 Classification of the substance or mixture
Classified as a Workplace Hazardous Substance
SUSDP Classification
Scheduled 6 poison ADG Code Classification Class 3, Packing Group III UN No./ Proper Shipping Name 1866 – RESIN SOLUTION Initial Emergency Procedure Guide 14
Potential health effects
Health effects are likely to occur from overexposure. No adverse health effects expected if safety precautions are followed. Acute Swallowed Ingestion may cause irritation of the mouth and the oesophagus and possible nausea, vomiting, or stomach pain may result. Hydrocarbon solvents represent an aspiration hazard. Ingredients in this product are classified as workplace Hazardous Substances and may cause irritation to eyes, nose and throat, cause headache. Skin May be absorbed through the skin. Contact of this substance with the skin may cause irritation or allergic reaction. Repeated or prolonged contact may cause de-fatting of skin and lead to contact dermatitis. 2of8 Inhaled Burning sensation. Cough. Laboured breathing. Shortness of breath. Sore throat. Inhalation of vapour, mist or aerosol may cause irritation to throat and mucous membranes of nose. Chronic (long-term) effects The ingredients are reported as sensitising in animal tests. Sensitisation may occur by inhalation or by skin contact. Carcinogen status Not classified by NOHSC, NTP or IARC Eye contact: Irritant. May cause damage if not washed out promptly. CHRONIC (LONG TERM) EFFECTS: Repeated or prolonged contact may cause skin sensitization. Repeated or prolonged inhalation exposure may cause asthma (see Notes). The ingredients have been shown to cause adverse respiratory effects at high concentrations in animal tests. 3: COMPOSITION & INGREDIENTS Ingredient Name CAS No. Percentage Classification Risk Phrases n-butyl acetate 123-86-4 50% - 90% not classified R10-66-67 Florescent Pigments 25%-50% R36/37/38 Cellulose acetate butyrate 9004-36-8 2.5%-10% R22-36/37/ Xylene 1330-20-7 36% Xn-Harmful>20% R20/21/38/65 2butossiethylacetate 112-07-2 29% - 33% Xn- above or =20% R20/21 4: FIRST AID For information ,contact Poisons Information Centre (phone 13 11 26 anywhere in Australia, toll free) or a doctor. Inhalation: If swallowed or inhaled, remove from contaminated area. Apply artificial respisration if not breathing. Keep patient warm and at rest and monitor condition. Seek medical advice if subject has any breathing difficulties or if exposure symptoms persist. (see Health effects this MSDS). Symptoms will vary depending an amount of exposure. In severe exposure cases subject could appear blue or grey in colour and may require artificial respiration and / or CPR – apply treatment – seek medical attention immediately. (Emergency Phone - Fire Police Ambulance in Australia 000)