Note: Ingredients listed on restricted chemical lists
EC/CAS
25322-68-3
Name of the chemical
polyethyleneglycol
Concentration
N/A
General Information
Revision date
2020-05-28
Product name
SWAK
supplier name
Swagelok London
Emergency telephone
North America 1-800-535-5053 International 1-352-323-3500
Icons in SDS
Company Information
company name
Swagelok London
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H242, H315, H317, H319, H335, H413
Hazard statements
Code
Statements
H242
Heating may cause a fire
Section 2
CLP CLASSIFICATION
CLP]Mixtures/Substances SDS EU 2015 According to Regulation (EU) 2015/830 (REACH Annex II) Organic Peroxide Category E H242 Skin corrosion/irritation Category 2 H315 Serious eye damage/eye irritation Category H319 2 Skin sensitization, Category 1 H317 Specific target organ toxicity (single H335 exposure) Category 3 Hazardous to the aquatic environment - H413 Chronic Hazard Category 4
Hazard statements
see section 16 : H242 - Heating may cause a fire. H315 - Causes skin irritation H317 - May cause an allergic skin reaction H319 - Causes serious eye irritation H335 - May cause respiratory irritation H413 - May cause long lasting harmful effects to aquatic life
Adverse physicochemical, human health and environmental effects
No additional information available
2.2 Label elements
Labeling according to Regulation (EC) No. 1272/2008 [CLP] Extra labelling to displayExtra classification(s) to display
Hazard pictograms
GHS02 GHS07
Signal word
Warning
Hazardous Ingredients
Poly(oxy-1,2-ethanediyl), .alpha.,.alpha.'-[(1-methylethylidene)di-4,1-phenylene]bis[.omega.-[(2- methyl-1-oxo-2-propenyl)oxy]-; Polyethylene glycol; Cumene hydroperoxide
Precautionary statements
P210 - Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P234 - Keep only in original packaging. P240 - Ground and bond container and receiving equipment. P261 - Avoid breathing dust/fume/gas/mist/vapors/spray. P264 - Wash hands, forearms and face thoroughly after handling. P271 - Use only outdoors or in a well-ventilated area. P272 - Contaminated work clothing should not be allowed out of the workplace. P273 - Avoid release to the environment. P280 - Wear personal protective equipment (PPE). P302+P352 - IF ON SKIN: Wash with plenty of water. P304+P340 - IF INHALED: Remove person to fresh air and keep comfortable for breathing. P305+P351+P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P312 - Call a POISON CENTRE or doctor if you feel unwell. P321 - Specific treatment (see supplemental first aid instruction) P332+P313 - If skin irritation occurs: Get medical advice/attention. P333+P313 - If skin irritation or rash occurs: Get medical advice/attention. P337+P313 - If eye irritation persists: Get medical advice/attention. P362+P364 - Take off contaminated clothing and wash it before reuse. P370+P378 - In case of fire: Use media other than water to extinguish. P403+P233 - Store in a well-ventilated place. Keep container tightly closed. P405 - Store locked up. P410 - Protect from sunlight. P411 - Store at temperatures not exceeding 482°F/250°C. P420 - Store separately. P501 - Dispose of contents/container to hazardous or special waste collection point, in accordance with local, regional, national and/or international regulation.
Other hazards which do not result in classification
Exposure may aggravate pre-existing eye, skin, or respiratory conditions. Inhalation of fumes from overheating "TEFLON" PTFE may cause polymer fume fever, a temporary flu-like illness with fever, chills and sometimes cough, of approximately 24 hours duration. This material contains an organic peroxide. Heating may cause hazardous decomposition. Hazardous decomposition products from peroxides are flammable and can be explosive under confinement. Dust is not expected to be generated, however repeated or prolonged exposure to titanium dioxide dust via inhalation is suspected of causing cancer of the respiratory tract. Due to the product’s final form, combustible dusts are not likely to be generated, however if small particles are generated during further processing, handling or by other means, may form combustible dust concentrations in air.