8160 TR Urethane Emulsion Part B

Hazard statements (CLP)

H304, H314, H317, H335, H412

Code

Statements

H304

May be fatal if swallowed and enters airways

SECTION 2: Hazards identification

OSHA Acute Oral Toxicity, Category 2 Skin Corrosion, Category 1C Serious Eye Damage, Category 2A

Aspiration hazard

Category 1

Signal word

Danger

Hazardous Ingredients

4,4’-Diphenylmethane Diisocyanate

Hazard statements

H317 May cause an allergic skin reaction H304 May be fatal if swallowed and enters airways H412 Harmful to aquatic life with long lasting effects H335 May cause respiratory irritation H314 Causes severe skin burns and eye damage

Precautionary statements

P273 Avoid Release to the Environment P280 Wear protective gloves/ protective clothing/eye protection/face protection. P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do so. Continue Rinsing. P310 Immediately Call a POISON CENTER or doctor/physician. NFPA CODES

HMIS® ratings

Health : 2* Flammability : 1 Reactivity : 1 Personal Protection : X 2 1

Health hazards

N/A

Potential health effects

SKIN: Acute: Isocyanates react with skin protein and moisture and can cause irritation which may include the following symptoms: reddening, itching, rash, scaling, blistering and swelling. Cured material is difficult to remove. Contact with MDI can cause discoloration. Chronic: Prolonged contact can cause reddening, swelling, rash, and in some cases, skin sensitization. Animal tests and other research indicate that skin contact with MDI can play a role in causing isocyanate sensitization and respiratory reaction. EYES: Causes irritation with symptoms of reddening, tearing, stinging, and swelling. If left untreated, corneal damage can occur and injury is slow to heal. Damage is usually reversible. See first aid for treatment. INHALATION: Acute: MDI vapors or mist at concentrations above the TLV or PEL can irritate (burning sensation) the mucous membranes in the respiratory tract (nose, throat, lungs) causing runny nose, sore throat, coughing, chest discomfort, shortness of breath and reduced lung function (breathing obstruction). Persons with a preexisting, nonspecific bronchial hyper reactivity can respond to concentrations below the TLV or PEL with similar symptoms as well as asthma attack or asthma-like symptoms. Exposure well above the TLV of PEL may lead to bronchitis, bronchial spasm and pulmonary edema (fluid in lungs). These effects are usually reversible. Chemical or hypersensitive pneumonitis, with flu-like symptoms (e.g., fever, chills), has also been reported. These symptoms can be delayed up to several hours after exposure. Chronic: As a result of previous repeated overexposures or a single large dose, certain individuals may develop sensitization to isocyanates (asthma or asthma-like symptoms) that may cause them to react to a later exposure to isocyanates at levels well below the TLV or PEL. These symptoms, which include chest tightness, wheezing, cough, shortness of breath or asthmatic attack, could be immediate or delayed up to several hours after exposure. Extreme asthmatic reactions can be life threatening. Similar to many nonspecific asthmatic responses, there are reports that once sensitized an individual can experience these symptoms upon exposure to dust, cold air, or other irritants. This increased lung sensitivity can persist for weeks and in severe cases for several years. Sensitization can be permanent. Chronic overexposure to isocyanates has also been reported to cause lung damage (including fibrosis, decrease in lung function) that may be permanent. INGESTION: May cause irritation and corrosive action in the mouth, stomach tissue and digestive tract. Symptoms may include abdominal pain, nausea, vomiting, and diarrhea. CHRONIC HAZARDS: No Carcinogenic substances as defined by IARC, NTP and/or OSHA. Medical conditions aggravated by exposure include: skin allergies, eczema, asthma, and respiratory disorders (bronchitis, emphysema, bronchial hyper reactivity).