General Information
Product name
GEO SuperGrout
1.2.1 Relevant identified uses
Thermal Conductive Grout used in geothermal or other bore holes. GEO SuperGrout is a “single” bagged material when water is added, can be directly poured, placed or pumped into geothermal or other bore holes
Manufacturer Name
SuperGrout Products, LLC
Icons in SDS
Company Information
company name
SuperGrout Products, LLC
Section 2
SECTION 2: Hazards identification
Geo SuperGrout contains a small fraction of Portland cement and/or Portland cement derivatives which are fully disclosed in the following Hazard Identification. These factors are clearly defined beginning with the word “Cement” in the following disclosures. These disclosures are common in ordinary Portland cement and Portland cement mixtures. The remaining balance of ingredients are inert and pose no hazard requirements other than silica exposures, which are fully disclosed under the cement disclosures. Emergency Overview: Cement is a solid, grey, odorless powder. It is not combustible or explosive. A single, short term exposure to the dry powder presents little or no hazard. Exposure of sufficient duration to wet cement, or to dry cement on moist areas of the body, can cause serious, potentially irreversible tissue (skin, eye, respiratory tract) damage due to chemical (caustic) burns, including third degree burns.
Potential health effects
Eye Contact: Airborne dust may cause immediate or delayed irritation or inflammation. Eye contact with large amounts of dry powder or wet cement can cause moderate eye irritation, chemical burns and blindness. Eye exposures require immediate first aid and medical attention to prevent significant damage to the eye. Skin Contact: Cement may cause dry skin, discomfort, irritation, severe burns, and dermatitis. SECTION 5: FIRST AID Inhalation: Remove to fresh air immediately. If breathing difficulty occurs, seek medical attention and administer oxygen if coughing and other medical symptoms persist. Skin: Wash skin with soapy water and rinse with clean cool water immediately. Apply moisturizing lotion to dry and irritated skin areas. Seek medical attention in cases of severe irritation and burns. Eyes: Immediately flush eyes with large quantities of water, flushing for 15 minutes include under the lids to remove grainy particles. Call a physician immediately. Ingestion: Do NOT induce vomiting. If conscious, have victim drink plenty of water and call a physician immediately. SECTION 6: HMIS HAZARD RATINGS Product Rating Scale HEALTH: =1 Insignificant = 0 FLAMMABILTY: =0 Slight = 1
Physical hazards
0 Moderate = 2 REACTIVITY: =0 High = 3 Extreme = 4 PERSONAL PROTECTIVE EQUIPMENT = E
Health hazards
E = SAFETY EYEWEAR, GLOVES, DUST RESPIRATOR) SECTION 7: FIRE FIGHTING MEASURES FLASH POINT: N/A AUTO IGNITION TEMPERATURE: N/A FLAMMABLE LIMITS: LEL: N/A UEL: N/A EXTINGUISHING MEDIA: Product is non‐combustible. Carbon dioxide, water, dry‐ chemical, or chemical foam may be used should smoldering occur.
