General Information
Revision date
2010-03-29
Product name
SUPERCLEAN ACCUVISION
Manufacturer Name
SuperClean Brands, LLC
Emergency telephone
1-800-535-5053
Icons in SDS
Company Information
company name
SuperClean Brands, LLC
Section 2
Hazardous Ingredients
OSHA Chemical Name CAS# % Threshold Limit Value Permissible Exposure Limit Isopropyl alcohol 67-63-0 1 – 5 STEL: 500ppm TWA: 400 ppm Propylene glycol mono butyl ether 5131-66-8 1 – 5 NE TWA: 50 ppm
Acute Health Hazards
Signs and Symptoms of Overexposure Probable Routes of Entry: Inhalation, eyes, skin Eyes: May cause mild to moderate irritation depending upon length of exposure. Redness or tearing. Skin: May cause minor irritation depending upon length of exposure or repeated exposure. Inhalation: Vapor or mist may irritate nose and throat. Ingestion: Nausea, cramps, diarrhea, vomiting. Health hazard when ingested in large quantity.
Medical Conditions Generally Aggravated by Exposure
Pre-existing skin disorders or eye problems Section 6 - Emergency First Aid Procedures Eyes: Immediately flush eyes with cool water for at least 15 minutes. Remove contact lenses. Obtain medical aid. Skin: Wash skin with cool water and soap. Obtain medical aid if irritation develops. Remove contaminated clothing and launder. Inhalation: Remove to fresh air. Monitor breathing. Obtain immediate medical aid if ill effects persist. Administer CPR if needed. Ingestion: Drink 1-2 large glasses of water. Obtain immediate medical aid or call poison control. Do not induce vomiting unless directed by a physician. During vomiting there is a danger of aspirating liquid into lungs, causing serious damage and chemical pneumonitis. If spontaneous vomiting occurs, keep head below hips to prevent aspiration and monitor for breathing difficulty. Seek immediate medical attention or call 911. Section 7 - Reactivity Data Stability: Stable under normal ambient storage conditions Incompatibility: Oxidizers, alkaline materials, acids, high temperatures, heat. Hazardous Decomposition Products: Thermal breakdown during fire may evolve carbon oxides, smoke and fumes. Hazardous Polymerization: Will not occur Section 8 - Spill & Leak Procedures Procedures for Cleanup: Remove ignition sources. Wear safety equipment. Small spills: Mop up and clean up with soap and water. Large Spills: Wear safety equipment. Area will be slippery. Eliminate flames and ignition sources. Dike product with sand or dirt. Keep out of surface waters. Salvage for reuse if possible. Otherwise place into suitable container for disposal. Dispose of saturated absorbent appropriately, since spontaneous heating could occur. Final cleaning may require use of detergents in order to remove slipperiness. Inform local pollution officials of spill. Spill may be considered RCRA hazardous. Call local regulatory agency. Waste Disposal: Dispose in accordance with federal, state and local regulations. Waste may be subject to RCRA regulation. Section 9 - Special Protection Information Ventilation Type General Required: Protective Gloves: Rubber, neoprene, and nitrile when there is prolonged or repeated contact. Respiratory Protection: Not needed under normal use conditions. If ventilation does not maintain vapor exposures below recommended limits, wear NIOSH approved respirators for organic vapors. Eye Protection: Safety glasses Other Equipment: Eye wash station. Rubber boots for spill cleanup.