Note: Ingredients listed on restricted chemical lists
EC/CAS
14807-96-6
Name of the chemical
Talc
Concentration
20-25
EC/CAS
13463-67-7
Name of the chemical
Reaction mass of titanium dioxide and silver chloride
Concentration
5 - 15
EC/CAS
616-38-6
Name of the chemical
dimethyl carbonate
Concentration
1 - 10
General Information
Revision date
2019-07-03
Product name
2.1 VOC 2K Primer
1.2.1 Relevant identified uses
Automotive refinish; for professional use only Summit Racing Equipment P. O. Box 909 Akron, OH 44309-0909 1-800-230-3030
Emergency telephone
1-800-424-9300, 1-202-483-7616
Icons in SDS
Company Information
company name
Summit Racing Equipment
GHS Information
Signal word
Danger
Section 2
SECTION 2: Hazards identification
According to Regulation 2012 OSHA Hazard Communication Standard; 29 CFR Part 1910.1200 According to Regulation
2.1 Classification of the substance or mixture
FLAMMABLE LIQUIDS Category 2 ACUTE TOXICITY: Oral Category 4 ACUTE TOXICITY: Dermal Category 4 ACUTE TOXICITY: Inhalation Category 4
Aspiration hazard
Category 1 CARCINOGENICITY: Category 2 SKIN IRRITATION: Category 2 EYE IRRITATION: Category 2A SPECIFIC TARGET ORGAN TOXICITY: SINGLE EXPOSURE Category 3 (Respiratory, Central nervous system) SPECIFIC TARGET ORGAN TOXICITY: REPEATED EXPOSURE Category 2 (Liver, Kidney, Central nervous system)
Signal word
Danger
Hazard statements
Highly flammable liquid and vapor. Harmful if swallowed. May be fatal if swallowed and enters airways. Harmful in contact with skin, causes skin irritation. May cause an allergic skin reaction. Causes serious eye damage. Harmful if inhaled. May cause respiratory irritation, drowsiness or dizziness. Suspected of causing cancer. Causes damage to organs through prolonged or repeated exposure.
Prevention
Read all warning statements on all labels for this and any other products to be mixed with it prior to use. Do not handle until all safety precautions have been read and understood. Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking. Ground/bond container and receiving equipment. Use explosion-proof electrical, ventilating, lighting, and other tools or equipment. Use only non-sparking tools. Take precautionary measures against static discharge. Do not breathe dust, fumes, gas, mist, vapors, or spray. Wash skin thoroughly after handling. Do not eat, drink, or smoke when using this product. Use only outdoors or in a well-ventilated area. Contaminated work clothing should not be allowed out of the workplace. Use personal protective equipment as required, (see Section 8). Wear protective gloves, protective clothing, eye/face protection. Wear an appropriate, properly fitted fresh air supplied respirator (NIOSH- approved TC19 or equivalent) during and after application, and until all organic solvent vapors and spray mists are exhausted, or any time airborne contaminant levels exceed exposure limits indicated in Section 8. If medical advice is needed, have product container or label at hand. Keep out of reach of children and pets at all times.
Response
IF SWALLOWED Immediately call a POISON CENTER or physician. Rinse mouth. Do NOT induce vomiting. IF ON SKIN (or hair): Wash with plenty of soap and water. Take off immediately all contaminated clothing and wash before reuse. Rinse skin with water or shower. If skin irritation or rash occurs Get medical attention. IF INHALED Remove person to fresh air and keep comfortable for breathing. If experiencing respiratory symptoms Get medical attention. IF IN EYES Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do, continue rinsing. If eye irritation persists Get medical attention. If exposed or concerned Get medical attention. Call a POISON CENTER, doctor, or physician if you feel unwell. IN CASE OF FIRE: Use dry sand, dry chemical or alcohol-resistant foam to extinguish; do not use water.
Storage
Keep container tightly closed. Store locked up, in a cool, well-ventilated place
Disposal
Dispose of unused amounts and empty container with an approved waste disposal facility only, in accordance with all local, regional, and national regulations. Avoid release to environment. If spilled, contain material with inert absorbent, in compliance with local, regional, and national regulations.