Note: Ingredients listed on restricted chemical lists
General Information
Revision date
2007-04-20
Product name
Wash skin thoroughly with soap and water. If drenched, remove and Styrene Acrylic co-Polymer elAStomeric emulSion
Icons in SDS
Company Information
company name
Structural Elastomeric Products, Inc
Section 2
Principle Routes of Exposure
Inhalation 6. aCCiDEnTal rElEaSE MEaSurES Skin Contact PERSonAL PRoTECTIon Eye Contact Appropriate protective equipment must be worn when handling a spill of this Ingestion material. InHALATIon PRoCEDuRES Prolonged inhalation of vapor or mist can cause the following: Keep spectators away. Recover free liquid. Floor may be slippery; use care to Coughing, shortness of breath, dizziness, intoxication avoid falling. Contain spills immediately with an absorbent (e.g. sand, earth). Open all windows. Ventilate confined spaces. Open all windows and doors. Keep EYE ConTACT product out of sewers and watercourses by diking or impounding, or advise Material can cause the following: authorities immediately. Moderate irritation-burning sensation, tearing, redness, swelling CAuTIon: Keep spills and runoff out of municipal sewers and open bodies of SkIn ConTACT water. Prolonged or repeated skin contact can cause the following: Dermatitis, allergic reactions IngESTIon 7. hanDling & SToragE May be health hazard when ingested in large quantities
Storage
ConDITIonS NOTES TO PHYSICIAN: There is no specific antidote. Treatment of overexposure Keep from freezing; material may coagulate. Do not store this material near food, should be directed at the control of the symptoms and clinical condition. feed, or drinking water. Keep containers closed when not in use. Do not handle or store near heat or strong oxidants. Keep from freezing. Adequate ventilation required. Do not handle