Manufacturing Place Taiwan

STL Technology Co., Ltd

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.
Health risk rating 2
Safety risk rating 1
Environmental risk rating 1

General Information

Product name

Manufacturing Place Taiwan

Product Synonyms

Lithium-ion battery module

Manufacturer Name

STL Technology Co., Ltd

Emergency telephone

Call CHEMTREC

Icons in SDS

Company Information

company name

STL Technology Co., Ltd

GHS Information

Signal word

Not

Section 2

2.1 Classification of the substance or mixture

Categories Not applicable with normal use 2.1.1 Preparation Hazards and Classification: The product is a Lithium ion battery and is therefore classified as an article and is not hazardous when used according to the recommendations of the manufacturer. The hazard is associated with the contents of the battery. Under recommended use conditions, the electrode materials and liquid electrolyte are non-reactive provided that the battery integrity remains and the seals remain intact. The potential for exposure should not exist unless the cell in the battery leaks, is exposed to high temperatures or is mechanically, electrically or physically abused/damaged. If the cell in the battery is compromised and starts to leak, based upon the battery ingredients, the contents are classified as Hazardous. 2.1.2 Hazard Summary:

Physical hazards

Not classified for physical hazards

Health hazards

Not classified for health hazards

Environmental hazards

Not classified for hazards to the environment Specific hazards Exposure to contents of an open or damaged cell or battery contact with this material will cause burns to the skin, eyes and mucous membranes. May cause sensitization by skin contact.

2.2 Label elements

Identification Number: Not applicable.

Hazard pictograms

Not applicable.

Signal word

Not applicable.

Hazard statements

Not applicable under normal use in accordance with United Nations Conference on Environmental and Development (UNCED) and Occupational Safety and Health Administration (OSHA). The article does not meet the criteria for classification.

Precautionary statements

P102: Keep out of reach of children.

Prevention

P103: Read label prior to use. P202: Do not handle until all safety precautions have been read and understood. P210: Keep away from heat/sparks/open flames/hot surfaces – No smoking. P234: Keep only in original container.

Response

P260: Do not breathe vapor or spray. (If cell/battery leaks) P280: Wear protective gloves/protective clothing/eye protection/face protection. P301/330/331 IF SWALLOWED Rinse mouth. DO NOT induce vomiting P303/361/353 IF ON SKIN (or hair) Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower. P304/340 If INHALED Remove victim to fresh air and keep at rest in a position comfortable for breathing. P305/351/338 IF IN EYES Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P310: Immediately call a POISON CENTER or doctor/physician. P363: Wash contaminated clothing before reuse. P370 In case of fire Use carbon dioxide, dry chemical or water extinguisher

Storage

P402: Store in a dry place. (Store as indicated in Section 7) P410: Protect from sunlight.

Disposal

P406: Store any spilled/leaking electrolyte material in a corrosive resistant container with a resistant inner liner. P501: Dispose of batteries in accordance with applicable hazardous waste regulations.

Supplemental label elements

None

Appearance/Odor

Solid object with no odor

Principle Routes of Exposure

thermally, electrically or physically abused to the point of compromising the enclosure. If this occurs, exposure to the electrolyte solution contained within can occur by inhalation, ingestion, eye contact and skin contact.

Potential health effects

2.4.3.1 Acute (short term): see Section 8 for exposure controls. In the event that this cell or pack has been ruptured, the electrolyte solution contained within the cell would be corrosive and can cause burns to skin and eyes. Inhalation: Inhalation of materials from a sealed cell is not an expected route of exposure. Vapors or mists from a ruptured cell may cause respiratory irritation. Ingestion: Swallowing of materials from a sealed cell is not an expected route of exposure. Swallowing the contents of an open cell can cause serious chemical burns to mouth, esophagus, and gastrointestinal tract. Skin: Contact between the cell and skin will not cause any harm. Skin contact with the contents of an open cell can cause severe irritation or burns to the skin. Eye: Contact between the cell and the eye will not cause any harm. Eye contact with the contents of an open cell can cause severe irritation or burns to the eye.

Long term hazards

see Section 11 for additional toxicological data

Medical Conditions Generally Aggravated by Exposure

Not Available

Interactions with other chemicals

Immersion in high conductivity liquids may cause corrosion and breaching of the cell or battery enclosure. The electrolyte solution inside of the cells may react with alkaline (basic) materials and present a flammability hazard.

Environmental effects

Not Available

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.