Information not relevant

EU Classification

European Regulation no. 1272/2008/EC The product is not classified as dangerous according to European Regulation no. 1272/2008/EC. 2.2 Label elements according to European Regulation no. 1272/2008/EC N/A 2.3 Information supplied by the manufacturer Prevent exposure to and inhalation of fumes that are generated during brazing operations, by means of mechanical ventilation and/or protective masks. Workers must wear and properly maintain all personal protective equipments supplied, and comply with safety procedures and information. STELLA s.r.l. Via Marconi 26 – 21041 ALBIZZATE (VA) – ITALY Tel. +39 - 0331- 985787 Fax: +39 - 0331- 985803 E-mail: info@stella-welding.com Web: www.stella-welding.com Doc. No.: A-01-002 According to 1907/2006/EC Doc. Rev. No.: 01 Date: Silver–Copper–Zinc-Tin Brazing Alloys 02/09/2015 Bare Rods, Wires, Foils, Rings, Preforms Page no: 2 of 6 Workers, prior of starting brazing and soldering operations, must be aware of safety procedures to be followed, and must strictly observe those procedures. Body of worker should be protected by appropriate clothes. Brazing and soldering operations may present the risk of generation of dangerous metal oxides and metal vapours and fumes (small particles with approx dimensions of millimetres). Depending on type of exposure, acute intoxication symptoms, due to fast absorption of relevant quantities of toxic elements, and chronic intoxication symptoms, with slow absorption of small quantities of toxic elements, may occur. Avoid over-heating of product and/or of pieces to be brazed. Do not eat and/or drink on work-place.