Stego Wrap

SECTION 2: Hazards identification

2.2 Label elements

No Label elements required/not a dangerous substance per Globally Harmonized System of Classification and Labeling of chemicals (GHS). Inhalation: Inhalation of this product is not a likely route of exposure at room temperature. In the case of critical situations (i.e. fire, overheating, or combustion) excessive inhalation of fumes may result in respiratory irritation. Skin: This product is not likely to be hazardous by skin contact under recommended conditions of use. Molten product may cause thermal burns. Eyes: This product is not likely to be an eye irritant under recommended conditions of use. Mechanical irritation is possible, but unlikely under recommended conditions of use. Molten product may cause thermal burns. Ingestion: Ingestion of this product is not a likely route of exposure.

2.1 Classification of the substance or mixture

Labeling of Chemicals (GHS). GHS Labeling: No Label elements required/not a dangerous substance per Globally Harmonized System of Classification and Labeling of chemicals (GHS). Inhalation: Inhalation of this product is not a likely route of exposure at room temperature. In the case of critical situations (i.e. fire, overheating, or combustion) excessive inhalation of fumes may result in respiratory irritation. Skin: This product is not likely to be hazardous by skin contact under recommended conditions of use. Molten product may cause thermal burns. Eyes: This product is not likely to be an eye irritant under recommended conditions of use. Mechanical irritation is possible, but unlikely under recommended conditions of use. Molten product may cause thermal burns. Ingestion: Ingestion of this product is not a likely route of exposure. Carcinogenicity: These components are not considered to be hazardous chemicals per OSHA Hazard Communication Standard: 29 CFR Part 1910.1200. No Ingredient of this product present at levels greater than or equal to 0.1 % is identified as probable, possible or confirmed human carcinogen by IARC. No ingredient of this product present at levels greater than or equal 0.1% is identified as a known or anticipated carcinogen by NTP. No ingredient of this product present at levels greater than or equal to 0.1% is identified as a carcinogen or potential carcinogen by ACGIH. SECTION 3: COMPOSITION / INFORMATION ON INGREDIENTS Chemical Characterization: Polyolefins and additives. * Description: Film made of polyolefins. ** Mixture: Chemical Characters: Polyolefin and additives. Hazard Information: The material is not expected to be classified as hazardous. SECTION 4: FIRST AID MEASURES The following first aid recommendations assume that appropriate personal and industrial hygiene practices are followed. If Inhaled: This material is not likely to be hazardous by inhalation. At room temperature, the material is neither an irritant nor gives off hazardous vapor. In case of excessive inhalation of fumes due to critical situations (fire, etc.) move the person to fresh air. If symptoms persist, contact a physician. In Case of Skin Contact: This material is not likely to be hazardous by skin contact. If molten material contacts skin, quickly cool in water, seek immediate medical attention. Do not try to peel solidified material from the skin or use solvents or thinners to dissolve it. In Case of Eye Contact: Not likely to be an eye hazard in present form. In the case of physical contact with eyes, rinse immediately with plenty of water and seek medical advice. In case of exposure to excessive fumes due to critical situations (fire, etc.) move the person to fresh air. If symptoms persist, contact a physician. If Swallowed: This material is not likely to be ingested in present form. Do not induce vomiting. Seek medical advice. SECTION 5: FIRE-FIGHTING MEASURES Suitable Extinguishing Media: Water, Water Mist, Dry Chemical, Carbon Dioxide, and Foam. If possible water should be applied as a spray from a fogging nozzle since this is a surface burning material. Use extinguishing measures that are appropriate to local circumstances and the surrounding environment. Specific Hazards During Fire Fighting: In its normal form, this product offers no unusual explosion hazards. See Hazardous Decomposition Products below. Special Protective Equipment and Precaution for Fire Fighters: Use personal protective equipment. Wear self- contained breathing apparatus and chemical protective clothing for firefighting, if necessary. Hazardous Decomposition Products: Normal combustion forms carbon dioxide, water vapor and may produce carbon monoxide, incomplete combustion products, other hydrocarbons, and hydrocarbon oxidation products depending on temperature and air availability. SECTION 6: ACCIDENTAL RELEASE MEASURES Personal Precautions: Collect spilled material. Danger of slipping on spilled product. Environmental Precautions: No special measures required. Prevent product from entering drains. Methods and Materials for Containment and Cleaning Up: Clean up promptly by physical collection, sweeping or vacuum. Recycle product or dispose of properly. SECTION 7: HANDLING AND STORAGE Precautions for Safe Handling: Good personal hygiene practices and employ good housekeeping. Always wash hands after handling the product. When handled in bulk quantities, this product and its associated packaging may present a crushing hazard due to the large masses involved, possibly resulting in severe injury or death. Take precautionary measures against static electricity. Minimize dust generation. Precautions for Safe Storage: Keep in a cool, dry, well ventilated environment. Product should not be stored in excessive cold, direct sunlight or temperatures exceeding 90°F. Compliance of this policy should ensure optimum performance of this product. Store in accordance with local regulations. Materials should be stored away from heat, sources of ignition, direct sunlight, oxidizing agents and other incompatible materials. Treat as a solid that can burn. SECTION 7: HANDLING AND STORAGE Continued... Please review the remainder of the SDS and this wrap’s technical data sheet for storage and additional information. If any of the conditions cited above pose a problem for the typical installation of Stego Wrap, please contact Stego Industries for additional information and solutions. SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION Engineering Controls: The level of protection and types of controls necessary will vary depending upon potential exposure conditions. Ventilate area to prevent accumulation of dust and fumes. Use local exhaust ventilation when