Note: Ingredients listed on restricted chemical lists
EC/CAS
232-475-7/8050-09-7
Name of the chemical
Rosin
Concentration
≤2.5%
EC/CAS
231-100-4/7439-92-1
Name of the chemical
Blei, massiv: [Partikeldurchmesser ≥ 1 mm]
Concentration
25-55% ≤2.5%
General Information
Revision date
2018-08-17
Product name
Lötdraht HS10 Sn60Pb40
1.2.1 Relevant identified uses
Brazing alloy
Emergency telephone
8 00 am - 5 00 pm (CET) +49 (0) 2051 3120 332
Icons in SDS
Company Information
company name
Stannol GmbH & Co. KG
e-mail address of the competent person responsible for the Safety Data Sheet
sdb@stannol.de
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H317, H360FD, H362, H372
Hazard statements
Code
Statements
H317
May cause an allergic skin reaction
Section 2
CLP CLASSIFICATION
Skin Sens. 1 H317 May cause an allergic skin reaction. Repr. 1A H360FD-H362 May damage fertility. May damage the unborn child. May cause harm to breast-fed children. STOT RE 1 H372 Causes damage to the central nervous system, the kidneys and the blood through prolonged or repeated exposure.
2.2 Label elements
Labelling according to Regulation (EC) No 1272/2008 The product is classified and labelled according to the CLP regulation.
Hazard pictograms
d ~ d ~ GHS07 GHS08
Signal word
Danger
Hazardous Ingredients
lead massive [particle diameter ≥ 1 mm] Rosin
Hazard statements
H317 May cause an allergic skin reaction. H360FD-H362 May damage fertility. May damage the unborn child. May cause harm to breast-fed children. H372 Causes damage to the central nervous system, the kidneys and the blood through prolonged or repeated exposure.
Precautionary statements
P201 Obtain special instructions before use. P260 Do not breathe dust/fume/gas/mist/vapours/spray. P263 Avoid contact during pregnancy/while nursing. P280 Wear protective gloves/protective clothing/eye protection/face protection. P308+P313 IF exposed or concerned: Get medical advice/attention.
Additional information
Restricted to professional users.
2.3 Other hazards
Solder wires / solder pastes: Inhalation of vapors released during the soldering process should be avoided. Flux vapors irritate the nose, throat, and respiratory tract, and can lead to allergic reactions (asthma) after prolonged or repeated contact. Therefore, an active suction is recommended. (Contd. of page 1) After working with the product and before eating, drinking or smoking, wash your hands with soap and water. Do not heat above 500 °C. Keep out of the reach of children. May cause occupational asthma
PBT Substances
Not applicable
vPvB Substances
Not applicable
