Stat-Site Controls

Principle Routes of Exposure

Only when used as directed

Classification system

In compliance with OSHA’s Hazard Communication Standard (29CFR 1910.1200), a chemical mixture is considered hazardous if it contains 1.0% or more of a hazardous compound or 0.1% or more of a carcinogen. The product does NOT contain hazardous material(s) in excess of these amounts; therefore, no SDS is required under the standard. National Fire Protection Association (NFPA) ratings (scale 0-4): Health=0 Fire=0 Reactivity=0 Hazard Overview Health: Minimal risk if used as directed. Fire: Not considered a fire hazard. Reactivity: Reagents do not contain hazardous materials according to the standard. Minimal risk. Special Hazards: Avoid ingestion of reagents, as toxicity has not been determined. Although no SDS is required by the standard, the following general guidelines are given should reagents be inhaled, ingested, or exposed to eyes or skin. Carcinogenicity information OSHA (Occupational Safety and Health Administration): None of the ingredients is listed. NTP (National Toxicology Program): None of the ingredients is listed. IARC (International Agency for Research on Cancer): None of the ingredients is listed. SECTION 3 – PRODUCT COMPOSITION The test kit is composed of Stat-Site Low Control and Stat-Site High Control. Stat-Site Low Control/303001 (The reagent contains by percentage the following amounts of chemicals) Chemical Name CAS No. Concentration None determined to be hazardous. Stat-Site High Control/303002 (The reagent contains by percentage the following amounts of chemicals) Chemical Name CAS No. Concentration None determined to be hazardous.