MSpray Wheel Cleaner 400g

Stalyce Holdings Australia Pty Ltd

Revision date : 2026-07-01

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.
GHS07
Health risk rating 5
Safety risk rating 5
Environmental risk rating 5

Note: Ingredients listed on restricted chemical lists

EC/CAS

68475-59-2

Name of the chemical

Petroleum, coal, tar and natural gas and their derivatives generated using distillation and/or other processing methods if they contain ≥ 0,1 % w/w 1,3-butadiene Alkanes, C3-4, if they contain > 0,1 % w/w Butadiene

Concentration

<15

EC/CAS

71-36-3

Name of the chemical

1-butanol

Concentration

<3

General Information

Revision date

2026-07-01

Product name

MSpray Wheel Cleaner 400g

Product name

MSpray Wheel Cleaner 400g

Identification on the label/Trade name

Motospray Wheel Cleaner 400g

1.2.1 Relevant identified uses

Car detailing product

Icons in SDS

GHS07 M004 M009 M010 M011 M026

Company Information

company name

Stalyce Holdings Australia Pty Ltd

GHS Information

Signal word

WARNING

Section 2

SECTION 2: Hazards identification

SUSMP Classification

None allocated

ADG classification

Class 2.2 Non-flammable, non-toxic gases

UN Number

1950, AEROSOLS

Signal word

WARNING Aerosols Category 3 Skin Irritation Category 2 Eye irritation Category 2A

Hazard statements

H229 Pressurised container may burst if heated H315: Causes skin irritation. H319: Causes serious eye irritation.

Prevention

P201: Obtain special instructions before use. P202: Do not handle until all safety precautions have been read and understood. P210: Keep away from heat, sparks, open flames and hot surfaces. - No smoking. P211: Do not spray on an open flame or other ignition source. P251: Do not pierce or burn, even after use. P261: Avoid breathing fumes, mists, vapours or spray. P262: Do not get in eyes, on skin, or on clothing. P264: Wash contacted areas thoroughly after handling. P281: Use personal protective equipment as required.

Response

P362: Take off contaminated clothing and wash before reuse. P301+P330+P331 IF SWALLOWED Rinse mouth. Do NOT induce vomiting P302+P352 IF ON SKIN Wash with plenty of soap and water P305+P351+P338 IF IN EYES Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P308+P313 If exposed or concerned Get medical advice P332+P313 If skin irritation occurs Get medical advice P337+P313 If eye irritation persists Get medical advice P372: Explosion risk in case of fire. P381: Eliminate all ignition sources if safe to do so. P370+P378: In case of fire, use carbon dioxide, dry chemical, foam. Water fog or fine spray is the preferred medium for large fires.

Storage

P410+P412: Store below 30°C, protect from direct sunlight and do not expose to temperatures exceeding 50°C.

Disposal

P501: If they can not be recycled, dispose of contents to an approved waste disposal plant and containers to landfill (see Section 13 of this SDS). Emergency Overview Physical Description & Colour: Aerosol spray, no data regarding colour. Odour: No data.

Health hazards

may cause serious irritation to eyes, skin irritant

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.