Note: Ingredients listed on restricted chemical lists
EC/CAS
101-68-8
Name of the chemical
4,4’-Methylenediphenyl diisocyanate
Concentration
N/A
EC/CAS
4098-71-9
Name of the chemical
3-isocyanatomethyl-3,5,5-trimethylcyclohexyl isocyanate
Concentration
N/A
EC/CAS
1333-86-4
Name of the chemical
carbon black
Concentration
N/A
General Information
Revision date
2020-07-10
Product name
SRP Velocity 247
1.2.1 Relevant identified uses
Automotive Glass Polyurethane Adhesion Primer
Emergency telephone
1-800-420-8036 (ProPharma) 24 hours
Icons in SDS
Company Information
company name
SRP
e-mail address of the competent person responsible for the Safety Data Sheet
msds-info@novusglass.com
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H066, H225, H317, H319, H334, H336, H351
Section 2
SECTION 2: Hazards identification
GHS Classification This product has been classified per GHS Standards under OSHA’s Hazard Communication Standard (29CFR §1910.1200), and Canada’s Hazardous Product Regulation (HPR). This is a self-classification.
2.1 Classification of the substance or mixture
Flammable Liquid Category 2 Carcinogenic Category 2 Skin Sensitizer Category 1 Eye Irritant Category 2A Respiratory Sensitizer Category 1 Specific Target Organ Toxicity Single Exposure Category 3
Signal word
Danger
Hazard statements
H225: Highly flammable liquid and vapor. H351: Suspected of causing cancer. H317: May cause an allergic skin reaction. H319: Causes serious eye irritation. H334: May cause allergy or asthma symptoms or breathing difficulties if inhaled. H336: May cause drowsiness or dizziness.
Supplemental label elements
H066: Repeated exposure may cause skin dryness or cracking.
Prevention
P201: Obtain special instructions before use. P202: Do not handle until all safety precautions have been read and understood. P210: Keep away from heat/sparks/open flames/hot surfaces. — No smoking. P240: Ground/bond container and receiving equipment. P241: Use explosion-proof electrical/ventilating/lighting/equipment. 2. HAZARD IDENTIFICATION, continued Precautionary Statements (continued): Prevention (continued): P242: Use only non-sparking tools. P243: Take precautionary measures against static discharge. P261: Avoid breathing fume/vapor. P264: Wash skin thoroughly after handling. P271: Use only outdoors or in a well-ventilated area. P272: Contaminated work clothing should not be allowed out of the workplace. P280: Wear protective gloves/eye protection. P285: In case of inadequate ventilation wear respiratory protection.
Response
P308+P313 If exposed or concerned Get medical advice/attention P312: Call a POISON CENTER or physician if you feel unwell. P363: Wash contaminated clothing before reuse. P303 + P361 + P353 + P352 IF ON SKIN (or hair) Remove immediately all contaminated clothing. Rinse skin with water Wash skin with plenty of soap and water. P321: Specific treatment (remove from exposure and treat symptoms). P333 + P313 If skin irritation or rash occurs Get medical attention P304 + P340 + P341 IF INHALED If inhaled or if breathing is difficult, remove victim to fresh air and keep at rest in a position comfortable for breathing. P342 + P311 If experiencing respiratory symptoms Call a POISON CENTER or physician P305 + P351 + P338 IF IN EYES Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P337 + P313 If eye irritation persists get medical attention P370 + P378 In case of fire Use materials appropriate for surrounding fire for extinction
Storage
P403 + P233 + P235 + P405: Store locked up in a well-ventilated place. Keep container tightly closed and cool.
Disposal
P501: Dispose of contents/container in accordance with local/regional/national/international regulations.
Hazard pictograms
GHS02, GHS08, GHS07