General Information
Revision date
2016-11-30
Product name
RendaClad LITE Board. 6mm, 9mm, 12mm
1.2.1 Relevant identified uses
and timber frame structures, offering a non-combustible classification. RendaClad LITE is a flexible
Emergency telephone
National Poisons Emergency Number / NHS: 111
Icons in SDS
Company Information
company name
SPSEnvirowall Ltd
e-mail address of the competent person responsible for the Safety Data Sheet
info@spsenvirowall.co.uk
Section 2
2.1 Classification of the substance or mixture
The Calcium Silicate products in their intact state do not present a hazard. However, one should be aware of the ill-effect and danger from prolonged exposure to the air-borne dust generated through cutting, drilling, routing, sawing and crushing of the fibre cement products. Acute Effects Skin condition: The dust from this product may cause irritation of the skin from friction but is not absorbed through the skin. Eye contact: The dust from this product may irritate the eyes causing watering and redness. Ingestion: Unlikely under normal conditions of use, but ingestion of the dust from this product may result in abdominal discomfort. Inhaled: The dust from this product may cause irritation of nose, throat and lungs causing coughing and sneezing.
Potential chronic health
Inhaled: Prolonged and continuous exposure (over a number of years) to significant, airborne, respirable dust levels containing crystalline silica may cause bronchitis, silicosis and lung cancer. Based on limited animal research, it is possible that repeated inhalation of cellulose fibre dust over time may lead to inflammation and scarring of the lung in humans. Radioactivity & Asbestos Content Silicate board/Fibre Cement Board do not contain hazardous materials to human or animals in their intact state. RendaClad LITE has been tested by authorised testing authority for Non Radioactivity Level and Non- Asbestos. Volatile Normal State Calcium Silicate Board/ Fibre Cement Board is made into gelatification material through the chemical reaction with a set temperature and humidity of raw material and make the final panels with its set strength. There are no volatile reactions during the process of manufacture. During the curing process water vapour is to be expected. High Temperature State Our Calcium Silicate Board/ Fibre Cement Board is tested to the standard of GB5464. During continuous burning, it will not emit smoke. Minimal amount of water vapour and a little carbon dioxide will be emitted under high temperature. Environmental Standard Calcium Silicate Board/ Fibre Cement Board is produced according to the China
Environmental hazards
Standard HJ/T223-2005” Technical Requirement of Environmental Labelling Products – Light Weight Drywall Board ”and its related requirement. Dust The calcium silicate board/fibre cement board in their intact state do not present a hazardous threat. One should be aware of the ill-effect and danger from prolonged exposure to the air-borne dust generated through cutting, drilling, routing, sawing and crushing of the calcium silicate board/fibre cement board. Contain no asbestos, brucite, meerschaum, glass fibre or formaldehyde in the raw material and the formulas.
2.2 Label elements
No data available
2.3 Other hazards
No data available
