PTFE-DRY COATING LUBRICANT AND RELEASE AGENT

SPRAYWAY, INC

Revision date : 2022-04-01

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.
GHS02 GHS07 GHS08 GHS09
Health risk rating 5
Safety risk rating 2
Environmental risk rating 5

Note: Ingredients listed on restricted chemical lists

EC/CAS

106-97-8

Name of the chemical

n-Butan, enthält  0,1% Butadien

Concentration

10-30%

EC/CAS

64742-49-0

Name of the chemical

Naphtha (petroleum), hydrotreated light

Concentration

10-30%

EC/CAS

67-64-1

Name of the chemical

acetone

Concentration

10-30%

EC/CAS

64-17-5

Name of the chemical

Ethanol

Concentration

1-5%

General Information

Version

1.0

Revision date

2022-04-01

Product name

PTFE-DRY COATING LUBRICANT AND RELEASE AGENT

1.2.1 Relevant identified uses

Coating Paris, ON N3L 3E7

1.2.2. Uses advised against

Not known (519) 442-7881

supplier name

SPRAYWAY, INC

Emergency telephone

1-866-836-8855

Icons in SDS

GHS02 GHS07 GHS08 GHS09

Company Information

company name

SPRAYWAY, INC

GHS Information

Signal word

Danger

Section 2

SECTION 2: Hazards identification

Physical hazards

Flammable aerosol Category 1

Health hazards

Serious Eye Damage/Eye Irritation Category 2A Specific Target Organ Toxicity - Category 31 Single Exposure

Aspiration hazard

Target Organs Category 1 1.Narcotic effect.

Environmental hazards

Acute hazards to the aquatic Category 2 Chronic hazards to the aquatic Category 2

Signal word

Danger

Hazard statements

Extremely flammable aerosol. Causes serious eye irritation. May cause drowsiness or dizziness. May be fatal if swallowed and enters airways. Toxic to aquatic life with long lasting effects.

Prevention

Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not spray on an open flame or other ignition source. Do not pierce or burn, even after use. Avoid breathing dust/fume/gas/mist/vapors/spray. Wash thoroughly after handling. Use only outdoors or in a well-ventilated area. Avoid release to the environment. Wear eye protection/face protection.

Response

IF SWALLOWED: Immediately call a POISON CENTER/doctor. Do NOT induce vomiting. IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER/doctor if you feel unwell. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. Collect spillage.

Storage

Store in a well-ventilated place. Keep container tightly closed. Store locked up. Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122°F.

Disposal

Dispose of contents/container to an appropriate treatment and disposal facility in accordance with applicable laws and regulations, and product characteristics at time of disposal. Other hazards which do not None. result in GHS classification

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.